Losi XXX-S
03-09-2002, 09:58 PM
#2191
has any tried the matt franis graphie front bumper brace? I heard it breaks the front diff cover. If you hit something hard enough is this true?
03-10-2002, 01:06 AM
#2192
Tech Adept
Noticed most of the Losi drivers do not run the stock Fear body.Is there a big difference in aerodynamics that even a intermediate club racer would notice? Not legal?
03-10-2002, 07:03 AM
#2193
Losi drivers do not use the Fear Body because it is illegal, not four doors. Only you would be able to tell if you can feel a difference in the car with different bodies.
03-10-2002, 10:01 AM
#2194
Tech Adept
Thanks. Forgot about the 4 door rule. I read somewhere where I heard it was topheavy.
03-10-2002, 10:16 AM
#2195
Stock body
The local track where I can race doesn't run by any set of rules. So I don't think that the stock body will be an issue. I do plan on racing at some track where it may be. What body would you guys recommend for use on the XXX-S.
03-10-2002, 11:49 AM
#2196
I personaly use the hot bodies strato.it's not too light and not too heavy.
Just my two.
Just my two.
03-10-2002, 04:31 PM
#2197
are there any aftermarket springs that will fit the stock xxx-s shocks? what about the spring set (9 different rates, i think) for the TC3?
03-10-2002, 05:27 PM
#2198
HPI spings fit, old Tamiya springs fit, new Tamiya's don't
03-10-2002, 05:58 PM
#2199
I just realized that my setup wheels from my Tamiya & HPI cars won't fit. Who makes some good ones for a standard drive shaft?
03-10-2002, 08:23 PM
#2200
Trinity Congos will fit, but they are 30+ lb springs.
03-11-2002, 12:54 AM
#2201
Tech Rookie
thanks guys, for the tips on the stripped screws...and speaking of bodies, which bodies do you run, if i may ask?
joe.
joe.
03-11-2002, 01:51 AM
#2202
thanks for the info 
i think i have old RS4 and TA03 springs somewhere.
i think i have old RS4 and TA03 springs somewhere.
03-11-2002, 10:04 AM
#2203
anyone here have problems with the wheels binding while in full turn? im using non losi rims and my car seems to vibrate a lot while cornering, do you guys modify anything when using aftermarket rims like yokomo?
03-11-2002, 11:21 AM
#2204
productnine: I run a '98 Accord Coupe body on my cars for club racing, and a Yokomo/Andys Stratus for real events.
03-11-2002, 12:46 PM
#2205
Tech Apprentice
Originally posted by Koya Dale.com
anyone here have problems with the wheels binding while in full turn? im using non losi rims and my car seems to vibrate a lot while cornering, do you guys modify anything when using aftermarket rims like yokomo?
anyone here have problems with the wheels binding while in full turn? im using non losi rims and my car seems to vibrate a lot while cornering, do you guys modify anything when using aftermarket rims like yokomo?
