Go Back  R/C Tech Forums > General Forums > Electric On-Road
Peak Dynasty/Orion Element >

Peak Dynasty/Orion Element

Peak Dynasty/Orion Element

Old 05-05-2004, 03:22 PM
  #1  
s2
Tech Adept
Thread Starter
 
s2's Avatar
 
Join Date: Feb 2004
Location: nr Coventry, UK
Posts: 239
Default Peak Dynasty/Orion Element

Im going to be using one of these type of motors soon and no one i know uses one so im a little stuck on tuning them, has anyone found a good brush/spring combo for these type motors? as im told it comes with shocking brushes from packet.

Cheers

Stew
s2 is offline  
Old 05-05-2004, 03:33 PM
  #2  
Tech Regular
 
Join Date: Aug 2003
Location: Daytona Beach
Posts: 288
Default

i run the dynasty and the stock brushes are good but they make a sprint brush that get better power. Start with the pro tuned motor. Reedy 767 work i've heard but i use peaks brushes. I use the springs that come with the pro tuned motors. Good luck with the motors i realy like them.
the shoe is offline  
Old 05-05-2004, 04:34 PM
  #3  
Tech Elite
iTrader: (2)
 
Mike Haynes's Avatar
 
Join Date: Sep 2003
Location: Area 51
Posts: 3,699
Trader Rating: 2 (100%+)
Default

I use a trinity 4499nt and orion red springs on the one i had, seemed pretty good to me.
Mike Haynes is offline  
Old 05-05-2004, 04:58 PM
  #4  
Tech Elite
 
popsracer's Avatar
 
Join Date: Oct 2002
Location: "Hot, Sunny Southern California"
Posts: 3,120
Default Peak Dynasty/Orion Element

s2;

Trinity #4499 work well along with Trinity Purple springs on both sides.

Be aware that at least for the 'Element', there are laydown AND stand-up brush versions.

I have personally only tried the laydown brush version. Very torquey, you can expect to Gear up 3-4 pinion teeth over a Monster Stock.
popsracer is offline  
Old 05-06-2004, 03:16 AM
  #5  
s2
Tech Adept
Thread Starter
 
s2's Avatar
 
Join Date: Feb 2004
Location: nr Coventry, UK
Posts: 239
Default

ill be using the stand-up brush version, i cant inagine that trimming the trailing edge would work on stand-ups, would it?
s2 is offline  
Old 05-06-2004, 06:06 AM
  #6  
Tech Legend
iTrader: (268)
 
Cain's Avatar
 
Join Date: May 2002
Location: West Fargo, North Dakota
Posts: 32,637
Trader Rating: 268 (100%+)
Default

we have used the laydown version, really torquey motor, lots of power. You should be quite happy with it.
Cain is offline  
Old 05-06-2004, 01:22 PM
  #7  
Tech Apprentice
 
Join Date: Oct 2003
Location: So-cal
Posts: 64
Default

If possible, run the laydown version. I'm not aware of a stand-up brush version though. Orion red springs and sprint brushes work really well, I'm sure you will be happy!
myvantage is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.