Speed Passion Cirtix Stock CLUB ESC
#406
Thanks alot for your help.Did I read it right on the manual that it says I would have to recalibrate everytime I make an atv or epa adj on my transmitter,does this really need to be done to be safe or can I just set it up and forget about it and make epa adjustments on my radio.Also with the programmer I'll be getting soon will the settings I choose get wiped out and go to default if I ever had to raclibrate the esc.
#407
Last week when I made esc adjustment via the controller, I didn't do any recalibrating. I must have missed that part in the manual. I didn't seem to have any radio or esc issues. Maybe this is just a safety precaution and probably the first thing to be done with have issues after changes.
The programming unit comes with a decal that will show you the setting range for the 3 options (Drag Brake, Brake, and Temp cutoff). You will need to confirm the selection before it makes the change. Best thing to do is write down your current settings before making your changes.
The programming unit comes with a decal that will show you the setting range for the 3 options (Drag Brake, Brake, and Temp cutoff). You will need to confirm the selection before it makes the change. Best thing to do is write down your current settings before making your changes.
Thanks alot for your help.Did I read it right on the manual that it says I would have to recalibrate everytime I make an atv or epa adj on my transmitter,does this really need to be done to be safe or can I just set it up and forget about it and make epa adjustments on my radio.Also with the programmer I'll be getting soon will the settings I choose get wiped out and go to default if I ever had to raclibrate the esc.
#408
Last week when I made esc adjustment via the controller, I didn't do any recalibrating. I must have missed that part in the manual. I didn't seem to have any radio or esc issues. Maybe this is just a safety precaution and probably the first thing to be done with have issues after changes.
The programming unit comes with a decal that will show you the setting range for the 3 options (Drag Brake, Brake, and Temp cutoff). You will need to confirm the selection before it makes the change. Best thing to do is write down your current settings before making your changes.
The programming unit comes with a decal that will show you the setting range for the 3 options (Drag Brake, Brake, and Temp cutoff). You will need to confirm the selection before it makes the change. Best thing to do is write down your current settings before making your changes.
#409
but did someone of you changed or adjust the cut off for the lipo??
think this is unadjastable right? reading the manual they say it will cut at 3.5!
is right?
think this is unadjastable right? reading the manual they say it will cut at 3.5!
is right?
#410
Tech Regular
iTrader: (13)
I have a question. I just got a combo and run Ni-MH batteries, but I didn't get the program card. Am I screwed? Will I be able to run a 4 minute heat? I hate to shell out the money for a lipo if I dont have to yet. I still have some good packs I'm not interested in retiring.
#411
Tech Champion
iTrader: (17)
Thanks alot for your help.Did I read it right on the manual that it says I would have to recalibrate everytime I make an atv or epa adj on my transmitter,does this really need to be done to be safe or can I just set it up and forget about it and make epa adjustments on my radio.Also with the programmer I'll be getting soon will the settings I choose get wiped out and go to default if I ever had to raclibrate the esc.
After the first initial calibration, all the adjustment on EPA after the calibration should not required another calibration. SP manual is more like a precaution or like a double checking reminder. Nothing major.....
#413
#414
Tech Champion
iTrader: (17)
I have a question. I just got a combo and run Ni-MH batteries, but I didn't get the program card. Am I screwed? Will I be able to run a 4 minute heat? I hate to shell out the money for a lipo if I dont have to yet. I still have some good packs I'm not interested in retiring.
If your NIMH are in good shape...it should do a 4 minutes race without any problem. The best part is...you don't need to worry about ballooning any LIPO cause you are running Nimh.
However...LIPO is the way to go. 1 lipo = 2-3 packs of NIMH. But cost of 1 Lipo is far less then 2-3 packs of Nimh.
#415
Tech Champion
iTrader: (17)
I never encourage anyone run any RC car for more then 6-7 minutes....no reason to do it, the motor will get hot, tires lose traction, car handle like crap...why run it until the batteries go down to zero..? No point...
#416
I myself ran the club spec with a 3 years old CORE RC 20C 5000mah lipo JUST to test and see how it handle with some bad old LIPO....still gave me 6+ minutes of running with the 17.5. I have to stop cause I don't like to stand on the driver stand more then 5 minutes...
I never encourage anyone run any RC car for more then 6-7 minutes....no reason to do it, the motor will get hot, tires lose traction, car handle like crap...why run it until the batteries go down to zero..? No point...
I never encourage anyone run any RC car for more then 6-7 minutes....no reason to do it, the motor will get hot, tires lose traction, car handle like crap...why run it until the batteries go down to zero..? No point...
i m worryng only because this is my first car and my first lipo and my first brushless!!!
so in the case my lipo is not well charged or i miss something i dont want theme to be ruined.
this is what i was asking....u r a big help!!
so the car will stop anyway befor 10 minutes because the esc will cut around 3.5 right?
may i ask u another question because u seems to know well the club race combo.
i adjusted the throttle range the first time i switch on the esc ad told in the manual, BUT i forgot to put throttle on REV before doing it. anyway it worked and the motor seems to rum properly BUT the lights are strange:
red light flashing even in neutral and yellow light always on....is this a problem?
thanks
#418
i dont understand.
i measured my lipo 5 minutes ago, (never used, brand new from shop) it was 3,8 per cell....is this charged or not?
so u r saying that 3,5 as a limit of the esc refers to the sum of the 2 cells?
im getting confused
#420