The micros are great handling, especially with the extra weight of the 540 in the back. It can outhandle any nitro, you obviosly don't have a micro. And making a micro go 68 would be the same reason you make anything go faster, it's fun. :)
|
Originally posted by Brandon R well i checked out the chart and according to it the mph it shows are deadly accurate.. within 1 mph...thats going by our dragcar though with 36 inch tire and 4.56 ratio at 7800 rpm it was right there on the mph |
It was dynoed at 48003 rpms. I'm not making it up. That's pretty dumb to say that you could just put bigger tires on touring cars. I have (2.2 truck wheels), and using the same gearing they barely accelerate. So I don't get what your trying to prove, because all your statments are wrong.
|
How do you know for sure it's going 68 mph???
|
larger tires WILL give any car more top end...changing the tire size is just like changing the gear ratio.. here is the formula
tire diameter 2.0 X 3.14= 6.28 spurgear 100 tooth pinion 25 tooth = 4.0 ratio now u take 6.28 divided by the 4.0 ratio this equals 1.57 final drive ratio... ok now instead of 2.0 tire diameter go up to 2.5 so 2.5 X 3.14= 7.85 spur gear is still 100 tooth as is the pinion is 25 = 4.0 now take 7.85 divided by 4.0 = 1.96 now with the same spur and pinion just a different tire size the actual gear ratio has changed a ton... meaning same gearing and bigger tires + more top speed the reason it does not acelerate well is the gearing has changed so much it has no torque now... when people race and choose gearing they do not go for speed.. u want an equal balance of speed and torqe.. if u want more speed run mod.. rpm's mean very little if there is no power to get it going.. |
Easy answer is to buy a venom speed meter, calibrate it correctly, and then take a video of the speed run, remove the shell and show the max speed all in one go otherwise you could still lie about its speed.
|
Why would I lie about how fast my car goes? Also the speed calculators were designed to figure out how fast you go, I didn't use them to figure it out, but you guys act like it is some thing someone came up with in 5 seconds.
Also, if you want to buy me a speed meter, you can, but I'm not going to. |
I totaly beileve Ajg. His micro can prababroly do some where in the 60 range. A 540 motor, so much RPM for a micro, cool lookin chassis im not surprised. All you who think he cant should buy one for yourself and try. You cant say he cantdo 68 mph unless you know for SURE!
|
Thanks. :)
Also I finished the alfa body for it. |
|
Originally posted by ajg The micros are great handling, especially with the extra weight of the 540 in the back. It can outhandle any nitro, you obviosly don't have a micro. And making a micro go 68 would be the same reason you make anything go faster, it's fun. :) |
Not a nitro, but I had a 1/10.
Also I just put in a different motor that reduced the speed to 50mph, because it gives me longer run times. and more torque. :) |
:eek:
|
What?
|
Originally posted by ajg Not a nitro, but I had a 1/10. Also I just put in a different motor that reduced the speed to 50mph, because it gives me longer run times. and more torque. :) |
All times are GMT -7. It is currently 07:38 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.