Speed Control Comparison Matrix
#1
Speed Control Comparison Matrix
I have spent some time pulling together a list of most of the speed controls that a lot of racers are using these days and the features of each of them. I find it to be a valuable comparison. I pulled most of the versions and capabilities from the current approved ROAR list, so that is the reason for the version numbers. I hope you guys find this somewhat useful.
The 1S Voltage Support column denotes whether or not the speed control has an internal booster for 1S racing. I know that most of the speed controls have some type of internal booster, but some are not strong enough to run without a receiver pack or external booster.
Anyway I hope people find this information useful!
The 1S Voltage Support column denotes whether or not the speed control has an internal booster for 1S racing. I know that most of the speed controls have some type of internal booster, but some are not strong enough to run without a receiver pack or external booster.
Anyway I hope people find this information useful!
#2
Thanks Art.
Might be helpful to include weight and efficiency numbers if the manufacturer provides the data
Might be helpful to include weight and efficiency numbers if the manufacturer provides the data
#7
What about these stats:
Price , resistance , drive(sensored/sensorless), motor limit(boosted/unboosted), performance on the track, smoothness/driveability , fet spec amp limit , cooling or no cooling, runs brushed motors or not, and bec rating.....
Price , resistance , drive(sensored/sensorless), motor limit(boosted/unboosted), performance on the track, smoothness/driveability , fet spec amp limit , cooling or no cooling, runs brushed motors or not, and bec rating.....
#8
Tech Master
iTrader: (3)
Might want to include a column about "actual footprint", that includes the measurements with the solder tabs. Some manufacturers only measure the case in an attempt to make their ESC seem smaller in advertisement material than they really are.
Example: Tekin advertises a width of 25mm, but with the solder tabs, it's actually 31mm.
Example: Tekin advertises a width of 25mm, but with the solder tabs, it's actually 31mm.