MM Pro + Novak 8.5
I'm going to pair a 8.5 Ballistic motor to a MM Pro ESC tonight but needed help on the wiring. The wires coming from the Castle ESC are red/white/black and from the Novak it is red/yellow/blue. Do I pair them by blue to black, yellow to white, red to red?
Thanks for the help. |
If it's a sensored system you need to wire up the phases correctly A to A...B to B...C to C.This should be marked on the motor and esc.If it runs backwards you need to reverse it via the esc programming
If it's a sensorless system you can wire them up in any manner and if it runs backwards switch any two wires hope this helps Steve |
Originally Posted by Casper06
(Post 7296740)
I'm going to pair a 8.5 Ballistic motor to a MM Pro ESC tonight but needed help on the wiring. The wires coming from the Castle ESC are red/white/black and from the Novak it is red/yellow/blue. Do I pair them by blue to black, yellow to white, red to red?
Thanks for the help. The red wire for A and white for B and black for C Looking from the back of of the motor. from left to right is A,B,C |
Thank you guys! I'm excited to get this running should be pretty sweet to have all that tune ability of Castle with a Ballistic motor. :nod:
|
All times are GMT -7. It is currently 08:36 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.