1/12 setup station/tools, who makes one?
i saw hudy has some stuff for 1/12, but does anyone else make one? how do you like whichever one you have? what setup tools do you use if not a setup station for your 1/12?
|
Niftech and something called a Unity Tool or something like that. But the Niftech doesn't directly measure toe, you measure the difference front to back, and doesn't do camber...Unity works off of the front rim which could be warped or distorted. Best bet right now is probably the Hudy.
|
Originally Posted by benben10
(Post 7280837)
i saw hudy has some stuff for 1/12, but does anyone else make one? how do you like whichever one you have? what setup tools do you use if not a setup station for your 1/12?
|
I assume you mean this one: http://www.integy.com/st_prod.html?p...29&p_catid=163
I'm thinking they mean 1/12th touring cars like the minis...I don't see anyway to mount a pan car front axle to that. |
Us govt issue: quarters
xacto knife two things you already have and work as good as anything :) |
Originally Posted by JayL
(Post 7291739)
Us govt issue: quarters
xacto knife two things you already have and work as good as anything :) |
Originally Posted by InspGadgt
(Post 7284457)
I assume you mean this one: http://www.integy.com/st_prod.html?p...29&p_catid=163
I'm thinking they mean 1/12th touring cars like the minis...I don't see anyway to mount a pan car front axle to that. You still need a tweak station or use the quarter/Xacto knife method to measure tweak. Ihe integy set-up staion does not measure tweak. |
Ah...then it won't do the 5/16ths front axle the CRC front end uses.
|
Originally Posted by InspGadgt
(Post 7284457)
I assume you mean this one: http://www.integy.com/st_prod.html?p...29&p_catid=163
I'm thinking they mean 1/12th touring cars like the minis...I don't see anyway to mount a pan car front axle to that. Nope, the new setup station from Integy has adaptors that will accomodate 1 1/12 pan cars as well as 1/10 touring cars. It is similiar to their earlier setup station in that it measures toe and camber. I use it for both my TC5R and my 12R5. |
Well we already established it has adapters for the 1/8th axles...but not all 1/12ths use a 1/8th axle. I wonder if they plan to have other adapters for the 3/16ths axle?
I don't particularly like that the Hudy uses the wheel bearings in that they will have some slop in them...but at least it will work with any sized axle. I'm planning on getting a Hudy eventually and hopefully I can find some fairly snug bushings to use instead of the bearings. My Holeshot one now works really nice on either sized axles but it is time for something new. And since I use the CRC front suspension on my BMI I'll need something that works on the 3/16th axles. I've tried several different front suspensions and find the CRC is the best so far. |
Any update or new kits available for 1/12?
|
All times are GMT -7. It is currently 10:57 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.