Nielsen

Hi you all here at RcTech.

I have a situation that I need your help to solve regarding belt for my touring car.

I have front belt from Serpent that is 501 and a Xray that is 507 - but I need a 504!
What belt do I need???

I also have a Serpent rear belt that is 177 and a Xray that is 183 - but I could really use a 180!
What belt do and can I use???

I hope someone can be of assistence.
Perhaps even a belt size overview

Thanks in advance.

Greatings
Nicolai Nielsen
Denmark

seaball

iTrader: (9)

nicolai,

updated list:
your 60t rear should be pretty easy. the 168t front will be tough. you may want to get serpent to move the layshaft fore/aft ~ 1.5mm so that you can either go with 169/59 or 167/61. those are more common than having a unique 168t made. or if you can put two more teeth on the pulley loops, you can go with 169/61.

billy asked me about this two years ago ...

BSYDOR

xray also has a 180mm or 60 tooth rear belt too - part # 305442. I too have been looking for a 504mm front belt.

Nielsen

Thanks for the link seaball.

How ever sad to see that no one uses a 168 belt, I might have to find a few belt teightning devices to fit my car in order to make use og the wished pullies.


Would I be so lucke that someone might even be able to help with a part number on the Tamiya, Xray and SChumacher 60T rear belts?
Thanks.

Yes it would be nice if Serpent would and could make theese changes for me - but I think that the result would be a changed motormount - and then I fear that the changes keep comming...

Thanks again

Nicolai

Danny-b23

iTrader: (3)

U3013 for the Schumacher Grey "Stock" belt.
U2721 for the Schumacher Black "Mod" belt.

Both are available at racing-cars.com.