BigBear

This is for an HPI micro rs4. I have heard that both 6 and 8 cell 2/3A packs are best. I am looking for some good batteries to build the pack. LHS only have the standard 1100mHh 2/3A cells. I am looking for better cells.

Has anyone used these?
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=3182526462

Are they good?

RCGaryK

iTrader: (3)

I've been using KAN 1050mah packs in one of my Mini T's and a Venom Racing 1100mah pack in the other. They're both really fast and good run times.

BigBear

How much are those?
If I buy 24, these are $1.40/cell. That seems pretty good for a high current cell. I can build 4 6-cell packs or 3 8-cell packs.
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=3181736165

Chill Will

Check www.promatchracing.com

BigBear

Those are $3/cell. If these are even close to as good as the KAN cells, I can build 4 packs for the price of one of those prebuilt packs.

Super Steve

iTrader: (9)

you can get URC kans for $1.20 for limited time... in their own signature blue shrink wrap too

www.unitedrc.com


BTW (I don't work for him) (just in case)

ratcar

It's good to have so many choices, even with high current cells.

BigBear

I just got the RED kans:
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=3182526462
I will build a pack and post how they compare with standard 2/3As.

sosidge

I sell the KAN cells, and I've done a lot of testing with them.

He's claiming 20A discharge with no voltage loss? Sorry, that's a long way off the mark. Halve that figure.

They are an excellent cell - but they don't perform like a sub-C...

LOADS of performance for a "Micro" car though.

PitCrew

Darn, I was hoping I could get say 12 of these cells, and run t six cell packs in parrallel in my 1/10 scale.

dux

BLind Batts has them for 1.09!