Schumacher Corner
Tech Elite
iTrader: (26)
only speaking for myself, i've broken more much more sweep rims in the past two weeks then i have in the past year using sorex and rp premounts. how they work on carpet i don't know. but there will be plenty around after nats to fine out.
Tech Champion
iTrader: (31)
Show 'em the power of 'THE TURTLEMASTER'
Tech Elite
iTrader: (117)
Hey guys - had a servo question
I was racing my mi3 the other night and after i bumped into something the servo was of to the left - I pulled it off re centered and it was ok for the next race. By the end of the main though it kept going to the left no matter how many times i recentered it.
So i took it home and put a new hitec servo in it and its still doing the same thing -
I install and center the servo and after i turn it a few times it gets off skew to the left
Is there something that could have happened in the chasis that would cause this, or did i just get unlucky and ahave two hitec servoes (both digital ultra speed (138oz/in)) with the same problem
I was racing my mi3 the other night and after i bumped into something the servo was of to the left - I pulled it off re centered and it was ok for the next race. By the end of the main though it kept going to the left no matter how many times i recentered it.
So i took it home and put a new hitec servo in it and its still doing the same thing -
I install and center the servo and after i turn it a few times it gets off skew to the left
Is there something that could have happened in the chasis that would cause this, or did i just get unlucky and ahave two hitec servoes (both digital ultra speed (138oz/in)) with the same problem
Pins in servo arm are stripped..
anyone know if a smc5000 will fit in the mi3?
@Stuart
Thats what happened to me again last week I was so upset and I bought myself a TR Scythe!!! I don't know whats wrong but I know it's not bearings or Tweak or shocks
but my one does that especially on full throttle...
Thats what happened to me again last week I was so upset and I bought myself a TR Scythe!!! I don't know whats wrong but I know it's not bearings or Tweak or shocks
but my one does that especially on full throttle...
Hey guys - had a servo question
I was racing my mi3 the other night and after i bumped into something the servo was of to the left - I pulled it off re centered and it was ok for the next race. By the end of the main though it kept going to the left no matter how many times i recentered it.
So i took it home and put a new hitec servo in it and its still doing the same thing -
I install and center the servo and after i turn it a few times it gets off skew to the left
Is there something that could have happened in the chasis that would cause this, or did i just get unlucky and ahave two hitec servoes (both digital ultra speed (138oz/in)) with the same problem
I was racing my mi3 the other night and after i bumped into something the servo was of to the left - I pulled it off re centered and it was ok for the next race. By the end of the main though it kept going to the left no matter how many times i recentered it.
So i took it home and put a new hitec servo in it and its still doing the same thing -
I install and center the servo and after i turn it a few times it gets off skew to the left
Is there something that could have happened in the chasis that would cause this, or did i just get unlucky and ahave two hitec servoes (both digital ultra speed (138oz/in)) with the same problem
Or are you using a servo saver
Skiddins
After 2 rounds of qualifiers at the nats, 2 MI3's in top ten. TQ and 9th. Mark Burt is TQ and Dave Duncan is 9th.
Several others are close, 11th and 12th.
Several others are close, 11th and 12th.
keep it up!
the mains are lined up for the 08 roar nats!
http://liverc.rccars.com/view_result...ns_Listing.xml
congrats to mark burt for some solid qualifying performances, placing his mi3 in the show for both stock and super-stock. and to tim kowal who gets to pilot his mi3 from the 5-spot in masters tomorrow. with triple-a mains, it's far from over.
awesome job, guys. lay it down tomorrow.
http://liverc.rccars.com/view_result...ns_Listing.xml
congrats to mark burt for some solid qualifying performances, placing his mi3 in the show for both stock and super-stock. and to tim kowal who gets to pilot his mi3 from the 5-spot in masters tomorrow. with triple-a mains, it's far from over.
awesome job, guys. lay it down tomorrow.
Last edited by seaball; 06-21-2008 at 06:24 PM. Reason: missing integrity
Tech Champion
iTrader: (42)
Alan was running a 416.....
i tried to catch him before anyone read the post. oh well, too late. lol
Tag, Way to wheel it old man.
Tag, Way to wheel it old man.
jesus, the kid just emailed me last week about running foams in vegas. by now, i shouldn't be surprised. seems like that's all we get anymore.
regardless, props out to mark burt and mr. kowal.
also, yeah, nice work, tag. and give rob love some for me for his double down effort. can't wait to get back in on the rug...
- c -
regardless, props out to mark burt and mr. kowal.
also, yeah, nice work, tag. and give rob love some for me for his double down effort. can't wait to get back in on the rug...
- c -