Schumacher Corner
PW, are all the sizes available on the site? I didn't see all of them list, some showed 0 stock on hand. If they are? Could you add them to my B/O list please. Thanks Ed.
Tech Lord
iTrader: (13)
Originally Posted by yyhayyim
Maybe the old 3PM had a 200ft range, but not the new one. I tested mine a few weeks ago at large 1/8 scale track down in florida running at the same time with 3PKs and M11 and NOmadios, and I had no glitches or problems, and it worked lightning FAST! People couldnt belive it...some have sold their own systems and have bought it and love it. Its really good, and feels so much lighter. You should all give it a try, you wont be sorry.
i am still running the origional spektrum system because i was torn between the 2.the spektrum pro had no specs on the range and the futaba did.i may give it a try.i just want to wait it out for a bit to see if there are any issues.i am one of the lucky few who have seen no glitches even with the indoor races on carpet(knock on wood)
Originally Posted by Mopar
PW, are all the sizes available on the site? I didn't see all of them list, some showed 0 stock on hand. If they are? Could you add them to my B/O list please. Thanks Ed.
Maybe one of the T-Maxx screw kits will have everything?
Tech Lord
iTrader: (13)
what was for dinner paul
Originally Posted by protc3
what was for dinner paul
You got my parts done yet
Tech Champion
iTrader: (17)
Hey Ed, if Schumacher doesn't have the screws in stock, you can always go to www.SpeedtechRC.com Steve has all the Ti screws you'll need.
Regional Moderator
iTrader: (9)
How do you know when your REALLY ready for the Mi3 to come out?!?
...In my case, its when I transfered all the Mi3 pics I have to my PS3 so I could look at all of them supersized and in 1080i HD!
...In my case, its when I transfered all the Mi3 pics I have to my PS3 so I could look at all of them supersized and in 1080i HD!
screws
Hello, Screws kits. Is the MI2 kit the same as the new MI3 car. or does someone know which screw kit would work for it. SPEEDTECH has them. Please help with info. Thanks Ron,
Originally Posted by Gone Racin
Hello, Screws kits. Is the MI2 kit the same as the new MI3 car. or does someone know which screw kit would work for it. SPEEDTECH has them. Please help with info. Thanks Ron,
Regional Moderator
iTrader: (25)
OFF THE SUBJECT
WANNA RACE? CHECK OUT THIS NEW TRACK!
www.rchobbiesraceway.com
the thread for this track is tittled Holy crapshaith what a facility
www.rchobbiesraceway.com
the thread for this track is tittled Holy crapshaith what a facility
Regional Moderator
iTrader: (9)
Just wondering, does Schumacher still pre-build the diff on the cars? Of all the things I loved about Schumacher kits, that.....wasn't one of them. The pre-built diffs were always notchy and sounded like chains being dragged on concrete!
So is it still done? And if it is, has it gotten any better since back in the day?
So is it still done? And if it is, has it gotten any better since back in the day?
Tech Master
iTrader: (16)
I'm not sure about the new diffs, but I can tell you all you needed to do on the old diffs was put the good thrust bearing in that lasted forever, sand both sides of the rings flat, use the carbide diff balls and use Schumacher diff grease and they were awesome.
Hopefully they did something to the new ones though!
Hopefully they did something to the new ones though!
Tech Champion
iTrader: (4)
The new diffs come un-assembled. The only thing done at the factory is the installation of the thrust bearing (the good one )
The only difference between the Mi3 diff and the past ones are indexed diff rings that lock on to the out drives. This lets you set the diff a little looser as its is now impossible to slip the rings on the outdrives. I looser rear diff gives more on power steering.
The only difference between the Mi3 diff and the past ones are indexed diff rings that lock on to the out drives. This lets you set the diff a little looser as its is now impossible to slip the rings on the outdrives. I looser rear diff gives more on power steering.
Tech Champion
iTrader: (4)
Originally Posted by mrrcguy
WANNA RACE? CHECK OUT THIS NEW TRACK!
www.rchobbiesraceway.com
the thread for this track is tittled Holy crapshaith what a facility
www.rchobbiesraceway.com
the thread for this track is tittled Holy crapshaith what a facility
Make sure a bid for the 2008 ROAR Nats On Road Nats comes from that track!
R/C Tech Elite Member
iTrader: (47)
Congrats on the new job Adrian, interested to see what you guys will have for the Mi3.