R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 05-11-2004, 06:42 AM   #6946
Tech Adept
 
Join Date: Jan 2004
Posts: 139
Default setup for asphalt

Hi all, I am running asphalt for the first time with my evo2 chub
short arms, can you expert's out there give me a good starting
point with my setup, I am running 12td, I went on the setup on
mytsn I saw a few but on the evo2 setup they said front anti-dive
1.5 is there 1.5 with the evo2, thanks guys.
Dr Smooth is offline   Reply With Quote
Old 05-11-2004, 10:31 AM   #6947
Tech Elite
 
AdR|aN's Avatar
 
Join Date: Jul 2003
Location: Malaysia. Land of Peace.
Posts: 2,445
Send a message via ICQ to AdR|aN
Default Re: setup for asphalt

Quote:
Originally posted by Dr Smooth
Hi all, I am running asphalt for the first time with my evo2 chub
short arms, can you expert's out there give me a good starting
point with my setup, I am running 12td, I went on the setup on
mytsn I saw a few but on the evo2 setup they said front anti-dive
1.5 is there 1.5 with the evo2, thanks guys.
Nop. If your driving the T1 EVO2 ( or FOC ) , you do not have the option of having front/rear anti-dive/squat at 1.5 deg.

The front/rear only have 0/3 deg of anti-dive/squat.

If you need a good set up, i would recommend you the basic set up.

You can download this set up at Click Here!!!

Hope it helps.

AdR|aN is offline   Reply With Quote
Old 05-11-2004, 10:32 AM   #6948
Tech Elite
 
AdR|aN's Avatar
 
Join Date: Jul 2003
Location: Malaysia. Land of Peace.
Posts: 2,445
Send a message via ICQ to AdR|aN
Default

Quote:
Originally posted by NKriptD
How many of you guys are using the Hudy Ulitimate Set-Up System?? What are your thoughts about it? Worth the money?
Worth every cent you pay for it.
One time investment. You wouldnt be looking for any other set up kits on the market.
AdR|aN is offline   Reply With Quote
Old 05-11-2004, 12:22 PM   #6949
Tech Champion
 
rayhuang's Avatar
 
Join Date: Dec 2001
Location: Cleveland Heights, Ohio
Posts: 6,511
Trader Rating: 5 (100%+)
Send a message via AIM to rayhuang
Default

Heres BMI's latest creation for the Xray!! I'll try and post a pic of my old car too so all can see the diferences.
Attached Images
File Type: jpg xraypro.jpg (54.2 KB, 174 views)
rayhuang is offline   Reply With Quote
Old 05-11-2004, 12:25 PM   #6950
Tech Champion
 
rayhuang's Avatar
 
Join Date: Dec 2001
Location: Cleveland Heights, Ohio
Posts: 6,511
Trader Rating: 5 (100%+)
Send a message via AIM to rayhuang
Default

Stock FOC.
Attached Images
File Type: jpg xraytop3.jpg (85.8 KB, 172 views)
rayhuang is offline   Reply With Quote
Old 05-11-2004, 12:25 PM   #6951
Tech Elite
 
JDXray's Avatar
 
Join Date: Mar 2004
Location: Long Island, New York
Posts: 2,802
Trader Rating: 3 (100%+)
Send a message via AIM to JDXray
Default

wow that is sweet Is that Xray T1R originally?

Nevermind my question, lol i guess when i was typing my message you told me it was FOC
JDXray is offline   Reply With Quote
Old 05-11-2004, 12:27 PM   #6952
Tech Elite
 
theisgroup's Avatar
 
Join Date: Apr 2002
Posts: 3,191
Trader Rating: 10 (100%+)
Default

ray

how do you like the new chassis?
__________________
yang lai

Team Tamale | Team Tekin | RCAmerica | Speedmerchant | Speedzone RC | EA Motorsports | Ko Propo USA | eXpress Motorsports | Parma/PSE
theisgroup is offline   Reply With Quote
Old 05-11-2004, 12:32 PM   #6953
drx
Tech Regular
 
drx's Avatar
 
Join Date: Mar 2004
Location: The Enlightened Side of Samsara
Posts: 398
Send a message via AIM to drx
Default

Quote:
Originally posted by NKriptD
How many of you guys are using the Hudy Ulitimate Set-Up System?? What are your thoughts about it? Worth the money?
I've got one and I love it. Works great. Worth every $.01.

If cost is an issue you might be able to get along without the baseboard, but I'd recommend you bite the bullet and get the whole schmeer.

<DrX>
drx is offline   Reply With Quote
Old 05-11-2004, 12:33 PM   #6954
Tech Addict
 
Join Date: Feb 2002
Location: Kansas City
Posts: 582
Default

Ray,
Where's the receiver??
Not a whole lot of room in there, is there...

Have you tried it out yet? I love the way mine handles.
It is really agressive in the corners. And to add to it, I have softer springs up front too on my set up and a one-way. Really rotates in the corners.

Later,
Billy "D"
BSYDOR is offline   Reply With Quote
Old 05-11-2004, 12:37 PM   #6955
Tech Champion
 
rayhuang's Avatar
 
Join Date: Dec 2001
Location: Cleveland Heights, Ohio
Posts: 6,511
Trader Rating: 5 (100%+)
Send a message via AIM to rayhuang
Default

It has the BMI quality for sure!! All edges chamferred, etc. Putting it on the track tomorrow night.

I'll post a pic of the bottom of the chassis to see how the batteries sit-no work-no hassle!!! Sit flush out of the package.
Attached Images
File Type: jpg xraypro2.jpg (64.8 KB, 172 views)
rayhuang is offline   Reply With Quote
Old 05-11-2004, 12:39 PM   #6956
Tech Champion
 
rayhuang's Avatar
 
Join Date: Dec 2001
Location: Cleveland Heights, Ohio
Posts: 6,511
Trader Rating: 5 (100%+)
Send a message via AIM to rayhuang
Default

Quote:
Originally posted by BSYDOR
Ray,
Where's the receiver??
Not a whole lot of room in there, is there...

Have you tried it out yet? I love the way mine handles.
It is really agressive in the corners. And to add to it, I have softer springs up front too on my set up and a one-way. Really rotates in the corners.

Later,
Billy "D"
You are right-this chassis-as I posted in the BMI thread is "performance" oriented and there will be sacrifices to convenience. Its more than enough room with this Cyclone (no diode-no Cap)and a KO 302 RX, but Its gonna be tough when I put a GT7 in it!!!
rayhuang is offline   Reply With Quote
Old 05-11-2004, 01:01 PM   #6957
Tech Champion
 
rayhuang's Avatar
 
Join Date: Dec 2001
Location: Cleveland Heights, Ohio
Posts: 6,511
Trader Rating: 5 (100%+)
Send a message via AIM to rayhuang
Default

Bsydor "D"-since your runnin-one-ways-that means you must have an extra 1.77 Diff laying arounf right? PLease sell me one or two of them. I have two problem diffs on my car.

Ray
p.s. Call me-youve got the number!!
rayhuang is offline   Reply With Quote
Old 05-12-2004, 04:48 AM   #6958
Tech Addict
 
Formula1fan's Avatar
 
Join Date: Dec 2003
Location: Buckeye City!
Posts: 691
Default

Ray, is that chassis the one they made espically for short arms? If so can the average Joe get one or is it still just for the Big Dogs?
Formula1fan is offline   Reply With Quote
Old 05-12-2004, 07:52 AM   #6959
Tech Champion
 
rayhuang's Avatar
 
Join Date: Dec 2001
Location: Cleveland Heights, Ohio
Posts: 6,511
Trader Rating: 5 (100%+)
Send a message via AIM to rayhuang
Default

Quote:
Originally posted by Formula1fan
Ray, is that chassis the one they made espically for short arms? If so can the average Joe get one or is it still just for the Big Dogs?
First off-Yeah Long LIve CART!!!

Anyways-anyone can get this short arm chassis. I think Jason and his Team guys (I am not one of them) are still developing this chassis-but it is definately available to anyone. For Jason-its all programmed in his CNC. I am running it tonight and will post my findings-though its important to know I am no Lopez or Cyrul-so you have to take anything I say with the knowledge I am just an average racer!!! Which is probably a good thing actually.
BTW-it can be used long arm, Pillow ball too.
rayhuang is offline   Reply With Quote
Old 05-12-2004, 10:20 AM   #6960
Tech Addict
 
Formula1fan's Avatar
 
Join Date: Dec 2003
Location: Buckeye City!
Posts: 691
Default

Are you racing it on carpet? I want to try it at CORCAR
Formula1fan is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS - NEW !!!! XRAY NT18T and XRAY NT18 plus HUDY micro truck starter box w/ battery Omarko Australia For Sale/Trade 2 06-25-2008 08:47 PM
Xray T2, Brushed Motor Combo, Setup Tools, Xray Springs, Bodies etc... GroffBall R/C Items: For Sale/Trade 13 09-23-2007 08:53 PM
WTB: NIB Xray T1FK05 & Xray Teflon coated aluminum Shock Body Adam.A Australia Wanted to Buy 4 01-02-2007 03:30 PM
WTB: Xray T1FK05 & Xray Teflon coated aluminum Shock Body Adam.A R/C Items: Wanted to Buy 1 12-30-2006 03:26 PM
XRAY sedan spring kit / XRAY multi-diff / PRS 114t spur / RR 64p pinions / Stratus evostyle R/C Items: For Sale/Trade 6 12-19-2006 09:33 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 02:32 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net