R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 09-14-2003, 09:48 PM   #4621
Tech Initiate
 
XRaycer's Avatar
 
Join Date: Sep 2003
Location: Colorful midwest
Posts: 45
Default

No Neil by sight we wouldn't recognize each other ? However in spirit we know one another. This is the first season I've ran an X-Ray (T1R), it's some nice plastic . I generally place in the A main at the local races(small tight layouts). And once in awhile I run at a very large gas facility, that is where I feel it performs the best. I've also ran it a couple times on the local carpet track and would've made the TEAM proud. Any way nuff bout me Talk to ya later

XRacer- Russ Horton
XRaycer is offline   Reply With Quote
Old 09-14-2003, 09:52 PM   #4622
Tech Initiate
 
XRaycer's Avatar
 
Join Date: Sep 2003
Location: Colorful midwest
Posts: 45
Default

Quote:
Originally posted by RCInfinity
You will need micro electronics to fit everything in the small spaces of the T1R. Yes the car is very stiff fore and aft, but there is some tortional flex. This good in low traction and/or cooler environments
oops
XRaycer is offline   Reply With Quote
Old 09-14-2003, 10:10 PM   #4623
Regional Moderator
 
BHenderson's Avatar
 
Join Date: Sep 2001
Location: Memphis TN
Posts: 1,199
Trader Rating: 3 (100%+)
Send a message via AIM to BHenderson Send a message via MSN to BHenderson Send a message via Yahoo to BHenderson
Default

Quote:
Originally posted by NismoSkyline17
Does anyone else run pivot ball on the rear and c hub up front? I just ran mine for the first time today and I like being able to adjust my rear toe in without buying all the hubs.
Nismo,

the rear toe is set by the clips that come in 1, 2, 3, 4 mm in size. Next race come check out my car and i will show you. It is much easier in my mind to run for C hubs on the car rather than mess with the pivot ball in the rear.
BHenderson is offline   Reply With Quote
Old 09-15-2003, 01:57 AM   #4624
Tech Addict
 
Nova JP's Avatar
 
Join Date: Sep 2003
Location: Lake Macquarie
Posts: 692
Trader Rating: 1 (100%+)
Default T1R Raycer

Can anyone please tell me what would be a good pinion to start with for a T1R with a Mirage 23 turn stock motor.
Nova JP is offline   Reply With Quote
Old 09-15-2003, 09:33 AM   #4625
Tech Initiate
 
Join Date: Feb 2002
Location: Hamburg, Germany
Posts: 22
Default VITEC XRAY CHASSIS

Hi!

This is the new design of the VITEC SYMBIOSIS XRAY Chassis.

We will produce it with SSG(silver surface graphite)-Carbon (same as Yokomo SD).



What do you think?


Michael, VITEC SYMBIOSIS
siebenelch is offline   Reply With Quote
Old 09-15-2003, 09:41 AM   #4626
Tech Champion
 
rc-zombies's Avatar
 
Join Date: Aug 2001
Location: NorCal. Napa area
Posts: 7,212
Trader Rating: 8 (100%+)
Default Re: VITEC XRAY CHASSIS

Quote:
Originally posted by siebenelch
Hi!

This is the new design of the VITEC SYMBIOSIS XRAY Chassis.

We will produce it with SSG(silver surface graphite)-Carbon (same as Yokomo SD).



What do you think?


Michael, VITEC SYMBIOSIS
looking good! but I would offer the optional front shock towers for C-hub racers....

What's your estimate price and shipping to the US?
__________________
HB WCE HARA EDITION CYCLONE: LRP Sphere TC, KO 2363 digital servo.
HB HARA EDITION PRO4: Gone to a new home..

SPEEDTECH|FUTABA|KO|ORION|SPEEDWORLD|HARA
rc-zombies is offline   Reply With Quote
Old 09-15-2003, 09:55 AM   #4627
Tech Elite
 
CRASH's Avatar
 
Join Date: Jan 2002
Posts: 2,715
Trader Rating: 26 (100%+)
Default

I have heard a rumor and I am sure everyone has heard it also, but is Xray going to release the EVO2 in the new blue scheme that we see on the 1/12th scale?

I hope so because that is way cool!

Later,
CRASH is offline   Reply With Quote
Old 09-15-2003, 10:00 AM   #4628
Tech Master
 
RandyB's Avatar
 
Join Date: Jul 2002
Location: Columbus OH.
Posts: 1,171
Trader Rating: 2 (100%+)
Default

cool chassis anything special about it other than looks?? are you going to make this bad boy stiffer??

randy b
RandyB is offline   Reply With Quote
Old 09-15-2003, 11:00 AM   #4629
Tech Fanatic
 
Accord's Avatar
 
Join Date: Apr 2003
Location: Boca Raton, FL
Posts: 997
Send a message via AIM to Accord
Default

Here are pics of a blue XRay 1/12 TC...

(Note: I didn't take these pics)



Accord is offline   Reply With Quote
Old 09-15-2003, 01:44 PM   #4630
Tech Elite
 
Neil Rabara's Avatar
 
Join Date: Jul 2002
Location: Lone Star
Posts: 4,821
Default

The different colors are cool. Some people in Japan have their names engraved in the graphite as well.
Neil Rabara is offline   Reply With Quote
Old 09-15-2003, 01:46 PM   #4631
Tech Elite
 
Neil Rabara's Avatar
 
Join Date: Jul 2002
Location: Lone Star
Posts: 4,821
Default Re: VITEC XRAY CHASSIS

Quote:
Originally posted by siebenelch
Hi!

This is the new design of the VITEC SYMBIOSIS XRAY Chassis.

We will produce it with SSG(silver surface graphite)-Carbon (same as Yokomo SD).



What do you think?


Michael, VITEC SYMBIOSIS
Do you have any finished products to post so we can look at it?
Neil Rabara is offline   Reply With Quote
Old 09-15-2003, 10:08 PM   #4632
Tech Regular
 
Matt04's Avatar
 
Join Date: May 2003
Location: Sydney
Posts: 300
Default

i ran my evo 2 for the first time last friday in 540 and down the straight it was great and when exiting the corner i had punch and power. but when i am going round the corner i loose alot of speed, and at the end of my track we have a big sweeper so i loose time there.

what can bee done to get more corner speed?can i make any ajustments or anything?
Matt04 is offline   Reply With Quote
Old 09-15-2003, 11:32 PM   #4633
Tech Fanatic
 
redsand's Avatar
 
Join Date: Sep 2001
Location: Chicane.
Posts: 855
Send a message via Yahoo to redsand
Default

Oh man the after market chassie is so sweet. If I had one of those, I'd put my xray on the showcase. I ain't gonna runnin it,no way.
redsand is offline   Reply With Quote
Old 09-16-2003, 06:19 AM   #4634
Tech Elite
 
CRASH's Avatar
 
Join Date: Jan 2002
Posts: 2,715
Trader Rating: 26 (100%+)
Default

Quote:
Matt04 i ran my evo 2 for the first time last friday in 540 and down the straight it was great and when exiting the corner i had punch and power. but when i am going round the corner i loose alot of speed, and at the end of my track we have a big sweeper so i loose time there.

What type of tires are you running?
What surface are you running on?

It sounds like you might be running the car to soft and scrubbing off speed thru the sweepers.
Have you tried using a one-way yet?
You might also want to try a front swaybar maybe even a rear swaybar.
Definetly sounds like you do need to stiffen up the car a little though.

Later,
CRASH is offline   Reply With Quote
Old 09-16-2003, 06:46 AM   #4635
Tech Elite
 
John Fontaine's Avatar
R/C Tech Charter Subscriber
 
Join Date: Mar 2003
Location: SouthEast PA
Posts: 2,699
Trader Rating: 2 (100%+)
Send a message via AIM to John Fontaine
Default

Can't wait to race again....last two weekends have been a bust due to weather outdoors. I'm glad to hear that indoor is starting up soon around here. Though I have to continue outdoor till mid October for the points series that i'm in.
__________________
Xray and Serpent....very dusty!
John Fontaine is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS - NEW !!!! XRAY NT18T and XRAY NT18 plus HUDY micro truck starter box w/ battery Omarko Australia For Sale/Trade 2 06-25-2008 08:47 PM
Xray T2, Brushed Motor Combo, Setup Tools, Xray Springs, Bodies etc... GroffBall R/C Items: For Sale/Trade 13 09-23-2007 08:53 PM
WTB: NIB Xray T1FK05 & Xray Teflon coated aluminum Shock Body Adam.A Australia Wanted to Buy 4 01-02-2007 03:30 PM
WTB: Xray T1FK05 & Xray Teflon coated aluminum Shock Body Adam.A R/C Items: Wanted to Buy 1 12-30-2006 03:26 PM
XRAY sedan spring kit / XRAY multi-diff / PRS 114t spur / RR 64p pinions / Stratus evostyle R/C Items: For Sale/Trade 6 12-19-2006 09:33 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 01:39 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net