LOSI XXX-S, Tips and Tricks, Open Mod, etc
#407
Mentioned this before but someone that can speak Japanese should contact Kawada. The Sigma used a similar single belt system and the belt may be the right size and tooth count. If not, Kawada may have the ability to make the belts or source them.
#408
Let me know what you come up with time with the belts. I was bummed the last ones didn't work.
Need some belts for my fleet of 10 cars.
Need some belts for my fleet of 10 cars.
#410
Tech Regular
iTrader: (13)
Well, here's the deal skater-deez1 and crew... the previous belts had almost too large a tooth so they rubbed inside the diff housings. I'm going to see if I can contact someone else who makes thinner belts if I need to in order to make this work. You guys can find all the other parts you still need, right?
#411
Tech Master
iTrader: (78)
Well, here's the deal skater-deez1 and crew... the previous belts had almost too large a tooth so they rubbed inside the diff housings. I'm going to see if I can contact someone else who makes thinner belts if I need to in order to make this work. You guys can find all the other parts you still need, right?
#412
Tech Regular
iTrader: (13)
Good news! Looks like I might have some belts soon! I bought a XXX-S to try some out because I had a hunch and it's looking very good. I anticipate having them within the month. Just thought I'd update! BTW... all XXXS cars have a tensioner, right? Or, is that just the longer belt? The one I have has a tensioner... that's the one I'm working with. I can cast and make pulleys and tensioners but that's going to cost extra.
Josh
Josh
#414
I'll take 4
#417
#420
I will take 2 to 4 depending on price. Maybe more ?