Novak Kinetic
#526
#528
#529
Tech Fanatic
iTrader: (13)
Had a blast this weekend with my new gear. Seemed to have good power, but it seems like it could have more. How much timing cam I put in there, or should I stay at 30*? the buggy's motor temp was 120 after 8 minutes and the esc was about 120. The trucks motor was about 150 after 5 minutes and the esc was about 120. Also, I'm having some problems understanding the Novalink program. What do I put in for the timing set point? Would it be safe to put the timing to boost?
#531
Tech Regular
I ran this weekend at our track using the settings that Steve Lander posted a few pages back; basically max timing with boost on and an FDR of 6.9
The car was pretty fast and the temp was coming in at 78 degrees - a minor concern but it was a cool day. I did, at one point, play with the drive frequency to make the car more 'punchy' but it just didn't feel right.
I don't think that I was just as fast as the GM or Hobbywing but they have been running for weeks now - I am more than happy that I will get there with the Kinetic. And the highest temp on the speedo was flashing blue lights.
I had the start and finish RPMs set at 4000 and 8000 - what are other people using on these?
Good stuff!
The car was pretty fast and the temp was coming in at 78 degrees - a minor concern but it was a cool day. I did, at one point, play with the drive frequency to make the car more 'punchy' but it just didn't feel right.
I don't think that I was just as fast as the GM or Hobbywing but they have been running for weeks now - I am more than happy that I will get there with the Kinetic. And the highest temp on the speedo was flashing blue lights.
I had the start and finish RPMs set at 4000 and 8000 - what are other people using on these?
Good stuff!
#532
I don't run one of these but if I look at what other ESC's are doing with timing advance and turbo/supercharge then I think your RPM range is a little tight, the motor temp would probably drop if you changed nothing else and used an rpm range of something like 4k to 13k. It's going to feel a little softer than before though.
#533
I ran this weekend at our track using the settings that Steve Lander posted a few pages back; basically max timing with boost on and an FDR of 6.9
The car was pretty fast and the temp was coming in at 78 degrees - a minor concern but it was a cool day. I did, at one point, play with the drive frequency to make the car more 'punchy' but it just didn't feel right.
I don't think that I was just as fast as the GM or Hobbywing but they have been running for weeks now - I am more than happy that I will get there with the Kinetic. And the highest temp on the speedo was flashing blue lights.
I had the start and finish RPMs set at 4000 and 8000 - what are other people using on these?
Good stuff!
The car was pretty fast and the temp was coming in at 78 degrees - a minor concern but it was a cool day. I did, at one point, play with the drive frequency to make the car more 'punchy' but it just didn't feel right.
I don't think that I was just as fast as the GM or Hobbywing but they have been running for weeks now - I am more than happy that I will get there with the Kinetic. And the highest temp on the speedo was flashing blue lights.
I had the start and finish RPMs set at 4000 and 8000 - what are other people using on these?
Good stuff!
#534
Company Representative
Developer email: [email protected]
#535
I couldn't agree more; I have heard that many calls/emails to tech support are due to users not reading our instructions. Racers are assuming that their knowledge is "portable".....from another esc to our Kinetic.
Developer email: [email protected]
Developer email: [email protected]
Now the concerns that I have are that the settings via the lights seem to be different from what they are in the novalink. This is really odd. Especially the drag brakes. If I set it with the lights they seem to work, if I have them set via the novalink, nothing, I got 50% drag brake set and the car is very rollie. The only thing that I haven't tried is recalibrating the radio as maybe the neutral point is not reading right.
#536
Tech Master
iTrader: (42)
Try lowering your dead band, on my first night I kept having the car roll at neutral when trying to go on and off the drag brake, and then it would kick in and just sit there, not recognizing neutral, so I tried lowering the dead band to 2 (lowest allowed) and it seemed to fix the problem. I did have it pop up as an issue once more later in the night, but I think I got it nailed down now with the lower dead band.
#537
Company Representative
I had just received the email addy from engineering and added it to the post I was working on. It was not directed at any specific commenter.
#538
Try lowering your dead band, on my first night I kept having the car roll at neutral when trying to go on and off the drag brake, and then it would kick in and just sit there, not recognizing neutral, so I tried lowering the dead band to 2 (lowest allowed) and it seemed to fix the problem. I did have it pop up as an issue once more later in the night, but I think I got it nailed down now with the lower dead band.