Novak Kinetic
11-15-2009, 07:14 PM
#77
11-15-2009, 08:46 PM
#78
Tech Elite
iTrader: (102)
Join Date: Dec 2004
Location: Far away from Covid19 but close to 20
Posts: 4,129
Trader Rating: 102 (100%+)
We design and build these products here in our Irvine factory.
Just for that I'll buy one just to try it out.
Please don't knock down something before trying it.
11-16-2009, 05:50 PM
#81
At this time, the Novak controllers using the NovaLink are the upcoming M2 Dig Dual brush controller (2 escs in one) and the Kinetic 2S.
All of the new programming features can be accessed thru the One-Touch button. So, it won't be necessary to take the NovaLink/PC to the track; or even purchase the software.
We will include guidance for adjusting the Kinetic's timing settings appropriate for each motor wind. Because we manufacture our motors here and control the accurate setting of the motor timing, we can include pointers on how to set up the complete system for maximum performance.
All of the new programming features can be accessed thru the One-Touch button. So, it won't be necessary to take the NovaLink/PC to the track; or even purchase the software.
We will include guidance for adjusting the Kinetic's timing settings appropriate for each motor wind. Because we manufacture our motors here and control the accurate setting of the motor timing, we can include pointers on how to set up the complete system for maximum performance.
11-17-2009, 07:12 AM
#83
NovaLink on SS and GTB
for GTB and SS Controller.
At this time, the Novak controllers using the NovaLink are the upcoming M2 Dig Dual brush controller (2 escs in one) and the Kinetic 2S.
All of the new programming features can be accessed thru the One-Touch button. So, it won't be necessary to take the NovaLink/PC to the track; or even purchase the software.
We will include guidance for adjusting the Kinetic's timing settings appropriate for each motor wind. Because we manufacture our motors here and control the accurate setting of the motor timing, we can include pointers on how to set up the complete system for maximum performance.
All of the new programming features can be accessed thru the One-Touch button. So, it won't be necessary to take the NovaLink/PC to the track; or even purchase the software.
We will include guidance for adjusting the Kinetic's timing settings appropriate for each motor wind. Because we manufacture our motors here and control the accurate setting of the motor timing, we can include pointers on how to set up the complete system for maximum performance.
Firmware Update is working through receiver socket on ESC.
i see NovaLink had possibilities to do that.
11-17-2009, 08:48 AM
#85
Our older escs---GTBs, XBRs, SSs, etc---are not NovaLink compatible and won't be. NovaLink compatible controllers require a new microprocessor.
11-17-2009, 04:47 PM
#86
NovaLink on SS and GTB and XBRs
The ROM of GTBs, XBRs, SS
That's bad news.
Hope New Version of NovaLink had abilities to do that soon.
11-18-2009, 08:12 AM
#88
Not that it was needed back then. All the crazy stuff we do now 1s-2s-3s-timing weren't even options racers thought of using when those ESCs came out.
Heck, it took some people a while to figure out how to keep their ESCs from tripping into reverse after a spin, or to not sit on the starting line for an extra .5 sec.
Heck, it took some people a while to figure out how to keep their ESCs from tripping into reverse after a spin, or to not sit on the starting line for an extra .5 sec.
11-18-2009, 08:45 AM
#89
We won't be re-designing the old controllers to be compatible with the NovaLink; we will design new ones.....
11-18-2009, 04:23 PM
#90
SLYDR NovaLink, KINETIC 2S 3S
Not that it was needed back then. All the crazy stuff we do now 1s-2s-3s-timing weren't even options racers thought of using when those ESCs came out.
Heck, it took some people a while to figure out how to keep their ESCs from tripping into reverse after a spin, or to not sit on the starting line for an extra .5 sec.
Heck, it took some people a while to figure out how to keep their ESCs from tripping into reverse after a spin, or to not sit on the starting line for an extra .5 sec.
Originally Posted by NovakTwo
We won't be re-designing the old controllers to be compatible with the NovaLink; we will design new ones.....
Bad news for Controller such SLYDR, this kind controller is quite NEW.
Which Based on GTB, is SLYDR incompatible to NovaLink too ?
Why KINETIC is mention 2S ? ,while Other capable to 3S and more..