XRAY T3
#2476
R/C Tech Elite Member
iTrader: (28)
303131 - Steel Shim For Lower Susp. Holder 3X7.5X0.4 (10)
303132 - Steel Shim For Lower Susp. Holder 3X7.5X0.75 (10)
303133 - Steel Shim For Lower Susp. Holder 3X7.5X1.15 (10)
303134 - Alu Shim For Lower Susp. Holder 3X7.5X1.5 (10)
Don't forget that you can also change your rear toe with different rear hubs - there are 1 degree left/right and 2 degree left/right hubs available in two different hardness - medium and hard.
#2477
For anyone that is worried about there lipos not fitting heres what I did. I use the older Acorn lipos and they dont fit under the top deck, so I took the little T looking pieces that are for the nimh's and put them in the middle of the car and they space the battery out just enough so it clears the top deck, and the battery just barely hangs off the chassis. The plus side to this, is it doesnt take weight to balance (at least not my car lol) And for the front to back holders I took the L shaped ones and cut them so there just straight so the lipo cant move forward or backwards
Also I started running my front camber link like Paul L, works really good! Well worth the few mins with a dremel.
Also I started running my front camber link like Paul L, works really good! Well worth the few mins with a dremel.
#2478
Nice Photo !
#2482
Tech Addict
iTrader: (91)
For anyone that is worried about there lipos not fitting heres what I did. I use the older Acorn lipos and they dont fit under the top deck, so I took the little T looking pieces that are for the nimh's and put them in the middle of the car and they space the battery out just enough so it clears the top deck, and the battery just barely hangs off the chassis. The plus side to this, is it doesnt take weight to balance (at least not my car lol) And for the front to back holders I took the L shaped ones and cut them so there just straight so the lipo cant move forward or backwards
Also I started running my front camber link like Paul L, works really good! Well worth the few mins with a dremel.
Also I started running my front camber link like Paul L, works really good! Well worth the few mins with a dremel.
#2485
As for no orange I gotta roll blacked out but thanks
#2488
Whats a good Asphalt setup to try? medium traction/sprayed soda pop 95deg weather 120X65