Pro 10: 235mm Le Mans Prototype Pan Car Discussion
#2222
Tech Apprentice
Hi Roy,
I do not understand how add images to my messages.. only one time I did from photobucket but now it does not work anymore!!
I do not understand how add images to my messages.. only one time I did from photobucket but now it does not work anymore!!
#2224
Tech Adept
Good job Giancarlo
Next time try with "imgur" website:
Next time try with "imgur" website:
#2225
Tech Apprentice
Thanks,
Sorry guys but I have a complicated reltionship with android and dos.. I hope in the apple soon..
Sorry guys but I have a complicated reltionship with android and dos.. I hope in the apple soon..
#2226
Tech Fanatic
iTrader: (1)
GT
Hi!
I did some creation of rear end
Car was driven on nitro track.
One of the movies.
https://www.youtube.com/watch?v=Sdbe-scNDaE
What I checked
- fronts lilacs spec tires,
- rear GP 25,
- fluid TC-5 corally or cs high grip (probably for me better will be tc-5...),
- body giana,
- fronts spring std 1/12 short ae .20, drop about 1mm,
- RH 5.5mm from front to end,
- rear pod drop -1mm, car chassis is flat when car on tires,
- center spring AE buggy blue, about 4lbs??? (silver buggy front was too soft),
- shock is yokomo bd7, 3 holes, 300 oil (~25wt),
- side lubes SHURE LUBE #5,
- side springs hard ones ae (gold),
- front lube 100k diff oil, for me was better ...
- front and rear tires soaked same time full,
- 2S lipo, ESC turbo with 17.5T engines,
- gearing 72/21 48p, tire about 60mm,
- front end is AE 12R5, block 10deg, max angle for king pin,
- toe out +1deg, camber about -2deg to made tires flat, maybe need right tire -3????
Anyway, with giana body it felt that rear end is pushed down to track,
I made some bigger holes on body post (just little bit) to made at this place body easy to fit.
What I got from this setup, car is nice for me but not too fast (speedo gearing, whatever), on corners when drive on blue grove it's like glued.
I don't know how to compare it to prev setup (without rear axle force) but I remember that was easy to spin out rear end, now I must break grip by stupid action on steering wheel ...
I must drive more, now I'm trying to learn again setup with rear end axle air down force.
Anyone try drive that cars with GT bodies?
Expierience?
We do not drive lolas and engine is limited (heh i got 100C on can)...
With parma aston (this nice carpet) car is hm ... square and su...s on racing
Was difficult, friends used Sophias and winner was driving PF C6-R vette.
I did some creation of rear end
Car was driven on nitro track.
One of the movies.
https://www.youtube.com/watch?v=Sdbe-scNDaE
What I checked
- fronts lilacs spec tires,
- rear GP 25,
- fluid TC-5 corally or cs high grip (probably for me better will be tc-5...),
- body giana,
- fronts spring std 1/12 short ae .20, drop about 1mm,
- RH 5.5mm from front to end,
- rear pod drop -1mm, car chassis is flat when car on tires,
- center spring AE buggy blue, about 4lbs??? (silver buggy front was too soft),
- shock is yokomo bd7, 3 holes, 300 oil (~25wt),
- side lubes SHURE LUBE #5,
- side springs hard ones ae (gold),
- front lube 100k diff oil, for me was better ...
- front and rear tires soaked same time full,
- 2S lipo, ESC turbo with 17.5T engines,
- gearing 72/21 48p, tire about 60mm,
- front end is AE 12R5, block 10deg, max angle for king pin,
- toe out +1deg, camber about -2deg to made tires flat, maybe need right tire -3????
Anyway, with giana body it felt that rear end is pushed down to track,
I made some bigger holes on body post (just little bit) to made at this place body easy to fit.
What I got from this setup, car is nice for me but not too fast (speedo gearing, whatever), on corners when drive on blue grove it's like glued.
I don't know how to compare it to prev setup (without rear axle force) but I remember that was easy to spin out rear end, now I must break grip by stupid action on steering wheel ...
I must drive more, now I'm trying to learn again setup with rear end axle air down force.
Anyone try drive that cars with GT bodies?
Expierience?
We do not drive lolas and engine is limited (heh i got 100C on can)...
With parma aston (this nice carpet) car is hm ... square and su...s on racing
Was difficult, friends used Sophias and winner was driving PF C6-R vette.
#2227
Tech Elite
iTrader: (13)
@M.Abramowicz.......Try this:
Tires BSR double purple front and purple rear
Tire fluid TC5 or spider red but time on fronts less then rear.
Use tire warmers with the TC5
Side springs AE Blue and 10000 in the tubes
Centre shock: Use a Tamiya TRF because thet are the best
Spring Tamiya TC yellow.
Caster 5 degrees instead of 10
Steering front: Try inline(Hyperdrive axle) and AE steering knuckle, that will give a bit more steering but calmb the car down alot because of the longer wheelbase
Camber and toe out seems ok
Front end try the B3/T3 kingpin with CRC side springs and then the green version.
Less play and also less moving parts and a progressive front end.
Front end pic but with AE inline
Regards Roy
Tires BSR double purple front and purple rear
Tire fluid TC5 or spider red but time on fronts less then rear.
Use tire warmers with the TC5
Side springs AE Blue and 10000 in the tubes
Centre shock: Use a Tamiya TRF because thet are the best
Spring Tamiya TC yellow.
Caster 5 degrees instead of 10
Steering front: Try inline(Hyperdrive axle) and AE steering knuckle, that will give a bit more steering but calmb the car down alot because of the longer wheelbase
Camber and toe out seems ok
Front end try the B3/T3 kingpin with CRC side springs and then the green version.
Less play and also less moving parts and a progressive front end.
Front end pic but with AE inline
Regards Roy
#2228
Hi,
I have a Corally C10X Graphite 235mm pro ten car for sale
Brand New, as it came out the box! (note: the C10x came pre-built out the box) Comes with new silver star Corally tyres, the optional fiberglass leafspring, Corally tool, stickers and instruction manual.
$160 + postage. PM for info
I have a Corally C10X Graphite 235mm pro ten car for sale
Brand New, as it came out the box! (note: the C10x came pre-built out the box) Comes with new silver star Corally tyres, the optional fiberglass leafspring, Corally tool, stickers and instruction manual.
$160 + postage. PM for info
#2229
Looks like a victory hawk vh10....
Last edited by Pro10freak; 06-14-2015 at 12:24 PM.
#2231
my c10-x
#2232
Tech Elite
iTrader: (13)
Check this link-----> http://www.rctech.net/forum/r-c-item...ally-c10x.html
I have seen both types Original from Corally
So yours and the one from Tom
I used to own a Hawk with the same chassis as yours Pro10freak.
Regards Roy
I have seen both types Original from Corally
So yours and the one from Tom
I used to own a Hawk with the same chassis as yours Pro10freak.
Regards Roy
#2233
Thanks for the record Pro10noob. Which one was released first ?
#2235
Hum hum.....i guess this car should join his twin in my collection ....