Hoon Sung

I designed new pod.
New pod is 10mm wider then original pod.
It removed axle shim.
All chassis made 3T carbon.
but wider bulkhead shaft is not making, yet.
I think, It will make next weekend and try to run.
I hope, It will good run.
Thanks guys for help.

westy1969

A nice and quick job! well done

2wdrive

looks good. With 3mm carbon that car will be quite durable. Did you make that clamp hub yourself? It looks longer then the clamp hubs from IRS.

I can't see it clearly but it seems you use a pinion with teeth where the edges are not 90 degrees. They seem to have a 45 degree angle going towards the top? I have bought similar 48dp pinions before but don't use them anymore as i found they damaged the spurs. I changed them to a normal 48dp pinion with straight teeth and the problem was gone.

Hoon Sung

Thanks guys.
I'm very exciting bacause I will drive on saturday.
anyway..
The left clamp hub is IRS. (IRS220)
It not include 235mm axle set.

I didn't use the pinoin on the picture.
It use on Yokomo R12(1/12) that 64P
I'm using 90 degrees pinion 48P on 2s lipo pro 10.

tallyrc

iTrader: (12)

oh the things i'd do if i owned a cnc mill...

ses414

iTrader: (4)

my humble RC10L2.
10.5T, 60A esc
Exceed F(hard) R(soft)
48P 81t/20t
3s2p4400mah lipo.

Pro10noob

iTrader: (13)

@SES414...
Your going for a LAFB???
That car would be flying

regards Roy

ses414

iTrader: (4)

@Pro10noob
Thanks for the compliment.
Tried the car at my local nitro track, not as fast as the 1/8th but did not get lapped by them in 7min. This beast has potential! Just brand new tyres and no tyre sauce.

spence88mph

To keep the tread alive, this vid though 2 years old is awesome.

Especially like the yellow car waiting for the car he's chasing to recover from the incident, true gentleman racing!

http://www.youtube.com/watch?v=A8ivIhZGjFg

Joost K.

Ahhh... These are our German Pro10 friends driving Pro10 chassis with modified motors. We are talking about 6 turns Delta in there!!!

They race with a very high fun & friendship factor as was seen in this movieclip...

2wdrive

From all the mod video's this one is my favourite.
http://www.youtube.com/watch?v=Ub6fLXI9m6A

Watch as they go past the driverstand full speed and seem to go straight into the wall at the end but steer into the tight turn at the last milisecond. That is some good driving there.

Bumpy

iTrader: (1)

Hey guys. Im trying to get in touch with Freddy Smolik from Rcdevil. Just received my new PC10H3X 235mm pan car chassis from him and there's NO shocks with it. I've sent him a few emails now with no response and need the shocks to run the car in my National champs in just over a weeks time down here in New Zealand of which im the current No.1. Would really like to retain my title but cant do it without shocks. Any help would be much appreciated.

2wdrive

That is a real pita. How many days are you already waiting for a reply? Even if they send it tommorow i am not sure you will get the shocks on time. Better prepare the old chassis to be sure.

I will see if i can contact him on this side of the pond

Bumpy

iTrader: (1)

I've emailed him twice since Sunday with no reply so far. Unfortunately I sold the old chassis to buy the Rcdevil chassis so am really hoping the shocks will get to me or I will not be racing at all.

Der Dicke

You could try some Associated RC18 shocks. The earlier prototypes used AE shocks.