3racing F109
#961
Tech Addict
iTrader: (45)
Hi,
We have indoor carpet racing track and Hobby shop in Chino, CA.
I'm ordering some ride f103,f104 tires and wheels, and it will be stocked soon.
I'll let you guys know when it's stocked.
Also, if you sign up you will be emailed the stock status.
You can order online @ www.tqrcracing.com
Thanks.
We have indoor carpet racing track and Hobby shop in Chino, CA.
I'm ordering some ride f103,f104 tires and wheels, and it will be stocked soon.
I'll let you guys know when it's stocked.
Also, if you sign up you will be emailed the stock status.
You can order online @ www.tqrcracing.com
Thanks.
#962
Tech Master
iTrader: (4)
Join Date: Mar 2009
Location: Tween a Rock & a Hard Place in Pa.
Posts: 1,279
Trader Rating: 4 (100%+)
Hi,
We have indoor carpet racing track and Hobby shop in Chino, CA.
I'm ordering some ride f103,f104 tires and wheels, and it will be stocked soon.
I'll let you guys know when it's stocked.
Also, if you sign up you will be emailed the stock status.
You can order online @ www.tqrcracing.com
Thanks.
We have indoor carpet racing track and Hobby shop in Chino, CA.
I'm ordering some ride f103,f104 tires and wheels, and it will be stocked soon.
I'll let you guys know when it's stocked.
Also, if you sign up you will be emailed the stock status.
You can order online @ www.tqrcracing.com
Thanks.
#963
Tech Master
iTrader: (25)
Join Date: Aug 2009
Location: Trabuco Canyon-- in the Pines!!
Posts: 1,769
Trader Rating: 25 (100%+)
I've got the 103 size--I'll be interested in Ride 104 tires/wheels when you get them.
Thanks Sean--
CYA Saturday
T
Thanks Sean--
CYA Saturday
T
#964
Tech Elite
iTrader: (84)
Just thought I would post a pic of my f109 . Just got done reconfiguring the layout so this is what I'm going to try this weekend and with the f104 front end on it and the 180mm track width makes it a little twitchy so I think this will makle it more stable with the battery this way.
#965
Just thought I would post a pic of my f109 . Just got done reconfiguring the layout so this is what I'm going to try this weekend and with the f104 front end on it and the 180mm track width makes it a little twitchy so I think this will makle it more stable with the battery this way.
That would make the car roll even more will increase more steering ..
#967
Keep us posted Jeff.
You might want to try a stiff front spring with that setup.
You might want to try a stiff front spring with that setup.
#969
Tech Fanatic
iTrader: (67)
If your in Australia and want to get an F1-09 try
www.topgunrchobbies.com.au
they have them on sprecial for $125 AUD which is cheaper than anywhere else I just bought mine from them and was happy with the service
Now to get some ride rims and tyres - so the best ride tyre/rims are the f103 - A type (for asphalt use)?
www.topgunrchobbies.com.au
they have them on sprecial for $125 AUD which is cheaper than anywhere else I just bought mine from them and was happy with the service
Now to get some ride rims and tyres - so the best ride tyre/rims are the f103 - A type (for asphalt use)?
#970
Tech Initiate
Can anyone tell me if the "Tamiya (#54161) F104 Low Friction Suspension Ball Set" will fit onto the F109 front suspension arms?
As these look very similar to the kit F109's units
As these look very similar to the kit F109's units
#971
That's what I use. The kit alu ones wears quite quickly and gets sloppy. There's a small play with the Tamiya balls as they are slightly smaller but the wear is very low - I just use the lower balls.
#973
Boras GP - second Cup race, second TQ&win!
The second Swedish F1Cup-race went pretty much the same as the first in Gothenburg - TQ, overall win and a new lap record in the A-main
I've made some minor changes since the last race. Softer springs; AE 3.75lbs. rear side springs and 0.20 AE front. The center shock is raised 2mm in the rear and the droop increased to 3mm (unscrewed the ball holder 2mm). inserted a 0.14 AE front spring inside the center shock (on the shaft between the piston&shock body). Ride height is 5mm rear and 6mm front. I feel getting very close to a perfect setup for the Ride medium tires on asphalt.
Edit ....
Oh I forgot - i didn't need the 40 gram extra weight on the motor pod - the car handled like a dream even without it.
End Edit ...
Last edited by InZane; 05-30-2010 at 08:18 AM.
#974
#975
Hi all,
Just brought myself a F109 and was wondering what hop-ups from Tamiya fit the 3Racing? If someone could give me a list of the hop-ups that fit, that would be very much appreciated.
Cheers,
Liam
Just brought myself a F109 and was wondering what hop-ups from Tamiya fit the 3Racing? If someone could give me a list of the hop-ups that fit, that would be very much appreciated.
Cheers,
Liam