Originally Posted by razzor
(Post 6949137)
when you open the software you need to select "2 in 1 program box" under the "device" tab.
Then select the hand programmer firmware and install/load it. I am using it on both the Xerun and my Sp speedcontrols. |
Originally Posted by razzor
(Post 6949137)
when you open the software you need to select "2 in 1 program box" under the "device" tab.
Then select the hand programmer firmware and install/load it. I am using it on both the Xerun and my Sp speedcontrols. And I've already tried at least ten times to reinstall it. http://img522.imageshack.us/img522/6724/soft.png |
Originally Posted by Born2Run
(Post 6949427)
razzor do you mean you have on your Program Box the v1.04_091225 and you use it on both HW and SP softwares? I want to know if a Program box upgrated from v1.02 to v1.04_091225 could work with the V1.32 Speed passion software.
i uploaded 1110 firmware to all esc's using it as well as saved 3 different profiles on each esc. |
Originally Posted by AGNO
(Post 6949676)
Yes I know, but but the problem is that in my software there is nothing.
And I've already tried at least ten times to reinstall it. http://img522.imageshack.us/img522/6724/soft.png |
AGNO have you tried to press "Upgrade"?
Are you sure you have download the latest software from HW? The latest is v1.6_091229 |
razzor what is the database version on your LCD screen? On mine i read 1.10, on AGNOS i read 1.65.What's in yours?
|
AGNO have you tried to press "Upgrade"?
Are you sure you have download the latest software from HW? The latest is v1.6_091229 The box "upgrade" is not active. I'm sure the software is the v1.6_091229 even now I tried to reinstall it. |
mine is 1.10 in the HW software and 1.70 in the SP software.
|
This what i get with my Mod SP GT esc using either software.
http://i6.photobucket.com/albums/y23...psoftware1.jpg http://i6.photobucket.com/albums/y23...software-3.jpg This is the lcd with either software. http://i6.photobucket.com/albums/y23...hwsoftware.jpg http://i6.photobucket.com/albums/y23...spsoftware.jpg |
As i can see we have the same things.Have you ever try (the last picture) to
return the LCD to V1.02? |
hi,would the HOBBYWING LCD Program Box work with the SP esc's?
|
Originally Posted by guinnes.s
(Post 6959190)
hi,would the HOBBYWING LCD Program Box work with the SP esc's?
|
Originally Posted by Born2Run
(Post 6951829)
As i can see we have the same things.Have you ever try (the last picture) to
return the LCD to V1.02? |
Thanks razzor.It would be very helpful because as i mentioned before, i cannot do it on my program box .
|
Hey guys:
I'm very new to brushless technology. I was wondering if any of you could tell whether this setup from Hobbyking.com is a XErun system or a ? It seems to have good reviews and is pretty cheap. I don't want to make a mistake and order the wrong stuff for my cars ( Losi MF2 and HPI Blitz). I was hoping these would be ok for both vehicles used for racing only. Your guys help would be greatly appreciated very much. Here is the link: http://www.hobbyking.com/hobbyking/s...dProduct=10330 thanks guys.... |
All times are GMT -7. It is currently 12:57 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.