KO PROPO EX-10 Helios q's

You're on Page 14 of 149
Go to
  • Thank you Theisgroup & KO staff!

    I'll try to recalibrate the potmeter this weekend.
  • Re: Batteries
    Quote:
    Originally posted by Hebiki
    here are the ones i use:

    Charger:
    http://www.bestbuy.com/site/olspage....0&type=product

    Batteries (1850mah NIMH)
    http://www.bestbuy.com/site/olspage....0&type=product

    i have a ton of these at the house, i use them for remote controls, my rc radios, wall clocks and my digital camera. great batteries too bad they're not matched! HAHAHAHAH
    1850mah, lol, I have some 2300, 2400 are on the way...
  • Re: Re: Batteries
    Quote:
    Originally posted by =MisFitz= NuKe
    1850mah, lol, I have some 2300, 2400 are on the way...
    Not all of us are spoiled like U
  • Re: Re: Re: Batteries
    Quote:
    Originally posted by P2
    Not all of us are spoiled like U
    lol, spoiled?, just go to Sam's, they are Energizer rechargeables
  • Steering wheel
    Mike, How did the spinner turn out? Got any pics?
  • Re: Re: Re: Batteries
    Quote:
    Originally posted by P2
    Not all of us are spoiled like U
    im not even sponsored like mike, let alone 2300mah batts!!! well i am.. by my checking account! juss messin with ya mike!
  • Re: Steering wheel
    Quote:
    Originally posted by KO PROPO Staff
    Mike, How did the spinner turn out? Got any pics?
    I am still fitting it, the only thing I found to hold it on looks like hell, so I am going to dremel it, and spray paint the little piece. I will post pics tomorrow night.
  • Here you go guys...

    As you can see the little piece in the center is all black, still need to grind it even more.


  • Damn it Mike! I was going to make that too.....guess you beat me to be the first one to own a "spinner" steering wheel on the Helio! Where is the big a$$ cross-drilled rotor and Brembo red caliper?

    Dom
  • Yeah, I am still tweaking it, it still has too much slop in the spinner for me, just need to find my old clutch parts boxes from my nitro days, to find the right shims. And then I am going to grind on the little black piece more, and paint, or polish it. I also need to get with Robert about getting some internal wheel parts to really modify, and make it look even sweeter. Robert, Ill give you a call sometime this week about it.
  • !Bling! You are going to blind someone on the driver's stand! Looks good Mike.
  • Mike,

    What wheel is that? I saw one of those Dub City Escalade diecast with spinner wheels and was tempted to buy one to start a project too!

    Dom
  • Dom, man, that would take way too long. Just buy the Ko Wheel adaptor, then go buy

    1 pair: the new Pro-Line Spinners
    1 pair: Pro-Line Spinner wheels
    1 3mmx20mm screw
    Some CRC 5mm clutch shims (like 6mm O.D. and 5mm I.D.)
    One package (two bearings) 12mmx8mm Bearings
    " " " " 8mmx5mm Bearings
    One of those Mugen Clutch-Holder-Together-Dealies (see picture, the black thing)

    Take the bearings out of the stock spinner, then get the grease out of the new bearings, and oil them. Then, fit one 8x5mm bearing into one 12x8mm bearing, then do the same for the other two bearings. Everything else should be self-explanetory, just put the new dual bearings into the spinner where the old ones where, then put in the mugen piece through both bearings, then shim it on the back side of the spinner so that the spinner doesnt hit the wheel, then put the screw through it all, and put the Ko wheel adaptor on the radio, then screw it all together. Any other questions just ask.
    -Mike
  • Quote:
    Originally posted by KO PROPO Staff
    !Bling! You are going to blind someone on the driver's stand! Looks good Mike.
    Thanks Robert
  • nice wheeel!!!!
    i just got my helio today~ man.... it is nice!
    just need to get the bigger grip for the handle
    a little too small for me.... but sure feel nice anyway!

Similar Threads