HPI Pro4 and LIPO help???
I hope someone can help me out. I haven't raced in a year but want to still use my Pro4 to race with. I don't exactly have the money to buy a new car. Setup is great and it runs well, but I would like to use LIPO. Has anyone got a lipo battery into it? I can't find a battery that will fit. I have to run a hard case lipo. If you have been able to get a hard case lipo to fit, can you post some pictures & what pack you are using. Any help would be great! Thanks..
|
I use Yeah Racing 3200 and Team Orion 3200 lipo's in my pro4 with the stock battery holder.
Yeah Racing: http://i179.photobucket.com/albums/w...4/IMG_5248.jpg Team Orion: http://i179.photobucket.com/albums/w...4/IMG_4229.jpg |
Ok Great, Only LIPO's I can find in my Area are square not round on the edges so I'll find me some round ones like that.
|
I've modified an old RC10 battery holder for some lateral stability. I've seen way too many batteries come sliding out for my taste.
http://i357.photobucket.com/albums/o...o4_battery.jpg http://i357.photobucket.com/albums/o...pro4_angle.jpg http://i357.photobucket.com/albums/o...ro4_bottom.jpg |
Cool Lipo holder there. Looks neat
|
I dont really understand why you'd be having issues fitting a lipo in there. The top deck is plenty high enough to fit the largest 2s packs. I use strapping tape to hold down my batteries without any issue.
|
I can use tape but my concern is same with pejota. The battery I have is right next to my shaft and can hit it if it moves just a little bit and then is right on the edge of the bottom frame. I have a reedy 5000 pack right now and have been trying to find ways to fit it in. pejota had a good idea and I'll see if I can try that.
|
The Pro 4 actually has plastic cleats you can mount to the chassis to keep stick packs locked in. Lipos are wider than a stick pack and won't work with the cleats.
Found that out the hard way after i ordered the plastic sprue with the cleats. :weird: |
yea that was my first wrong assumption.. The cleats should work perfect for the orion 3400 pack but if I want to use my 35c Reedy I need to have something like what you are using to hold it in place.
|
Im with pejota on this one as well. I use the Associated battery holders in my tc5 with lipos and it works great. Another option when I had Pro4 was taping the battery to the battery strap. That way you can take it completely out of the car for servicing.
|
I used an Orion 4800 LiPo for last years Challenge..it fit fine...I did make an aluminum battery hold down to keep it secure side to side... No problem against the shaft.
|
I'll have to take a photo of mine. I have servo mounts mounted next to the driveshaft to keep the battery from hitting it. No problems at all. Just use the holes there.
|
Originally Posted by RC-DriftNewb
(Post 5828783)
I'll have to take a photo of mine. I have servo mounts mounted next to the driveshaft to keep the battery from hitting it. No problems at all. Just use the holes there.
|
All times are GMT -7. It is currently 02:14 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.