Losi LCD's
04-16-2009, 08:13 PM
#1
Losi LCD's
Do the LCD's allow for increased steering angle of the front wheels without binding? When I do a full turn, the wheels chatter and vibrate up and down.
04-16-2009, 08:52 PM
#3
Nice!
Are the shaft lengths different between the JRX-S and the type R?
Are the shaft lengths different between the JRX-S and the type R?
04-16-2009, 09:20 PM
#4
Yes, very different since the first gen car ran shorter A arms. So the LCD's and the CVD's are shorter on that car. Only way you would use the shorter LCD's on the R is when you are running a oneway. Short arms can be a tuning option on the R from the first car, but no one has every really run them.
04-16-2009, 09:26 PM
#5
Tech Adept
I'm bummed how Hot Bodies/HPI took the LCD design, made it for the Cyclone, and called it something different.
04-20-2009, 12:05 PM
#6
Just checked the HB site and it looks like the cyclone runs standard cvd's?
Do the Losi LCD's short or long fit any other car?
Do the Losi LCD's short or long fit any other car?
04-20-2009, 12:21 PM
#7
04-21-2009, 08:27 AM
#8
If the Wheel hexes must be from Losi, then how about the Lock nuts, must also from the same brand?
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
