RCGT Pics & Paint ONLY! Show them off!
11-14-2009, 01:13 PM
#406
Thanks.
Hobbytown Corona is probably the closest, it's a parking lot event but they run program.
The really cool permanent facility would be West Coast RC Raceway in La Mirada.
Thanks,
AndyH
Hobbytown Corona is probably the closest, it's a parking lot event but they run program.
The really cool permanent facility would be West Coast RC Raceway in La Mirada.
Thanks,
AndyH
11-17-2009, 02:07 PM
#409
11-17-2009, 02:39 PM
#410
11-18-2009, 07:10 PM
#412
I just wanted to share....I got bit by the RCGT bug...
11-18-2009, 09:20 PM
#413
11-20-2009, 09:46 AM
#416
The Model Masters lacquer based paint does stick to lexan and is flexible. However, it doesn't bond the same as the Pactra paint made for lexan. If you are using the Model Masters lacquer based paints (I use the rattle cans), I would recommend scuffing the inside of the body where you paint. I would also recommend cleaning the inside of the body with mild dish washing soap and hot water. If you properly prep the body, use light coats, and allow the paint to cure between coats (I speed up the process with a hair dryer) you should have no issues using this paint. As an extra precaution I usually back the Model Masters paint with Pactra paint, but that isn't necessary.
11-21-2009, 08:29 PM
#417
Fresh Paint
11-21-2009, 09:07 PM
#420
The Model Masters lacquer based paint does stick to lexan and is flexible. However, it doesn't bond the same as the Pactra paint made for lexan. If you are using the Model Masters lacquer based paints (I use the rattle cans), I would recommend scuffing the inside of the body where you paint. I would also recommend cleaning the inside of the body with mild dish washing soap and hot water. If you properly prep the body, use light coats, and allow the paint to cure between coats (I speed up the process with a hair dryer) you should have no issues using this paint. As an extra precaution I usually back the Model Masters paint with Pactra paint, but that isn't necessary.
