What all is needed to run tc?New to electric.
#1
What all is needed to run tc?New to electric.
Here is my list so far.I am going to be running the car at the collosium.I know I need a charger but I would like a charger that has a powersupply built in.What else?
xray t2009
reciever
servo
ESC
(17.5T) Stock Brushless Motor
3800mah 30C Li-Poly Battery
Jaco Rubberz premount
1/10 setup station
Solder gun
transponder
bodys
xray t2009
reciever
servo
ESC
(17.5T) Stock Brushless Motor
3800mah 30C Li-Poly Battery
Jaco Rubberz premount
1/10 setup station
Solder gun
transponder
bodys
#2
Tech Lord
iTrader: (52)
Here is my list so far.I am going to be running the car at the collosium.I know I need a charger but I would like a charger that has a powersupply built in.What else?
xray t2009
reciever
servo
ESC
(17.5T) Stock Brushless Motor
3800mah 30C Li-Poly Battery
Jaco Rubberz premount
1/10 setup station
Solder gun
transponder
bodys
xray t2009
reciever
servo
ESC
(17.5T) Stock Brushless Motor
3800mah 30C Li-Poly Battery
Jaco Rubberz premount
1/10 setup station
Solder gun
transponder
bodys
#4
Tech Master
iTrader: (35)
Here is my list so far.I am going to be running the car at the collosium.I know I need a charger but I would like a charger that has a powersupply built in.What else?
xray t2009
reciever
servo
ESC
(17.5T) Stock Brushless Motor
3800mah 30C Li-Poly Battery
Jaco Rubberz premount
1/10 setup station
Solder gun
transponder
bodys
xray t2009
reciever
servo
ESC
(17.5T) Stock Brushless Motor
3800mah 30C Li-Poly Battery
Jaco Rubberz premount
1/10 setup station
Solder gun
transponder
bodys
I'd look at the Duratrax Onyx 230 for cost effectiveness as far as a charger goes. Or you can step up to the Hyperion EOS0606i for a little better charger.
#7
One of the things you will want are the steel bushings that go between the steering blocks and C-hub. You will want some extra screws, variety of shims, differents springs and swaybars, and maybe a tweak station, ride height guage, and chamber guage. I recommend if money allows to pick up the Hudy all in one setup station it is very handy and has everything thing you will possibly need to set up your car.
#8
Tech Fanatic
iTrader: (5)
One of the things you will want are the steel bushings that go between the steering blocks and C-hub. You will want some extra screws, variety of shims, differents springs and swaybars, and maybe a tweak station, ride height guage, and chamber guage. I recommend if money allows to pick up the Hudy all in one setup station it is very handy and has everything thing you will possibly need to set up your car.
#9
quarters for the vending machine
Last edited by revo523; 04-21-2009 at 04:24 PM. Reason: typo