moparSRT

Just about everything except for chassis, arms, arm mounts, steering & bumpers.

You can use TC3 arms on a TC4 by drilling out the inner hinge pin hole in the arm, and you can use TC4 arms on a TC3 by drilling out the arm mounts and using cut down TC4 inner hinge pins.

RED-LINE M03

iTrader: (127)

Thanks Greg, see ya soon at Superior.

Johnnyr/c

iTrader: (52)

hey guys, just out out of off road buggy and wanted to try out touring cars. i just bought a tc3 rtr with a novak esc,some brushed motor, flysky radio and turnigy lipo, alumn front st. knuckles etc. paid $105 for it. was looking to just play around and put drift tires on it and whatever happens is fine. are these still competitive out there as an on road racer? if so what rim/tire do i put on it? thanks for any help

moparSRT

still very competitive is spec racing, tires will depend on class.

THEBIGBULL

iTrader: (5)

Hey guys, I just picked up an IRS TC3 graphite conversion kit in new condition . Long since been discontinued.This is in the original package. An R/C barn find. Any build or setup tips to convert my team TC3 tubbie. It is currently set up for VTA.

Johnnyr/c

iTrader: (52)

glad to know the dinosaur is still alive!

Johnnyr/c

iTrader: (52)

glad to know the dinosaur is still alive!

IndyHobbies.com

Here's a listing of the parts for both. Print them, then grab your highlighter and you can cross check them pretty quick.

RED-LINE M03

iTrader: (127)

These do not belong to me but if you look close enough you will see some nice features.

Both of these cars have killed the new high dollar touring cars of today at some big ROAR races in 17.5 and Mod.

THEBIGBULL

iTrader: (5)

What chassis's are they!!!!

azeroth

iTrader: (21)

one looks to be a tub and the other looks like possibly a irs

RED-LINE M03

iTrader: (127)

Here you go....

http://www.penguinrc.com/products/as.../p5500tc3.html

Schs2013

What are the big differences between tc3 and tc4 ? I never had a tc3. Currently i have a tc4.

azeroth

iTrader: (21)

the big one is the steering rack after that it is geometry and pivot point tweaks

THEBIGBULL

iTrader: (5)

Marc, go back to post #12038. We've been down this road before, or go to the AE website. Both manuals are still listed for TC3 and TC4. I have a NIB TC3 Racer kit, with the Alfa body, partially assembled.........It could be yours!!!!

Stay Warm
TJ