Tamiya F104 Pro!
#4141
Tech Master
iTrader: (4)
Join Date: Mar 2009
Location: Tween a Rock & a Hard Place in Pa.
Posts: 1,279
Trader Rating: 4 (100%+)
OMG-- ()=thrust bearing
)(= thrust washer
(.)(.) = really fancy
trust the wiz--
)(= thrust washer
(.)(.) = really fancy
trust the wiz--
#4142
Tech Elite
iTrader: (32)
I think he means "or not to put like )("
I dont know if its better or not to place them like )( , personally I don't because I have a feeling that the outer rim of the inner washer would or might ride on the bearing shields instead of the outer rim of the bearing.
But it shouldn't be riding on either of them anyways, as the design is to have the thrust washer in contact with the inner race of the bearing so it rotates instead of rubbing on the outer race which may loosen up the diff nut when the diff is working as they spin in opposite directions.
Just my theory.
I dont know if its better or not to place them like )( , personally I don't because I have a feeling that the outer rim of the inner washer would or might ride on the bearing shields instead of the outer rim of the bearing.
But it shouldn't be riding on either of them anyways, as the design is to have the thrust washer in contact with the inner race of the bearing so it rotates instead of rubbing on the outer race which may loosen up the diff nut when the diff is working as they spin in opposite directions.
Just my theory.
#4145
#4149
I apologize for starting all this lol
#4151