12LikesTamiya F104 Pro!
01-22-2010, 04:08 PM
#2011
Originally Posted by fat500
I added some carbonfiber wingletts to the front of the f60.
They are adjustable , up for less front downforce or down for more downforce or level for neutral.
see pics below. I am adding some to the rear wings too, just over the tires.
I will post pics when done
They are adjustable , up for less front downforce or down for more downforce or level for neutral.
see pics below. I am adding some to the rear wings too, just over the tires.
I will post pics when done
01-22-2010, 09:20 PM
#2012
For everyone else who follows 1:1 F1, this picture reminds me of how the paddock is going to look for the 2010 season when tire warmers aren't allowed. 
Just bake the whole car! Either that or fat500 is going to fail tech inspection when his Lipo comes in above room temperature.
Awesome job on the paint, bro!
Just bake the whole car! Either that or fat500 is going to fail tech inspection when his Lipo comes in above room temperature.
Awesome job on the paint, bro!
01-22-2010, 10:44 PM
#2013
F-104 1S turning a wheel in anger
Driver, Richie Ginther: RA 272
Here's a nice slideshow from our Ultimate F1 Race last sunday
courtesy of WCRC
http://www.flickr.com/photos/west_co...64006956/show/
Driver, Richie Ginther: RA 272
Here's a nice slideshow from our Ultimate F1 Race last sunday
courtesy of WCRC
http://www.flickr.com/photos/west_co...64006956/show/
01-23-2010, 04:50 AM
#2015
Redbullfixx
How are you finding the cars like to drive with 1s power over 2s power?
There is talk that a 1s can be as fast but has a softer power band so more traction.
Can you confirm this?
How are you finding the cars like to drive with 1s power over 2s power?
There is talk that a 1s can be as fast but has a softer power band so more traction.
Can you confirm this?
01-23-2010, 07:41 AM
#2016
Nimo.
Yes, Id say that about sums it up.
I've only had this car out a few times, still learning so much about it.
The Tekin RS-17.5 is a perfect match for quick silver cans.
IF you can carry corner speed, this package will hold it's own.
Will try on carpet soon.
Yes, Id say that about sums it up.
I've only had this car out a few times, still learning so much about it.
The Tekin RS-17.5 is a perfect match for quick silver cans.
IF you can carry corner speed, this package will hold it's own.
Will try on carpet soon.
01-23-2010, 07:52 AM
#2017
Tech Initiate
Nice pics
01-23-2010, 03:25 PM
#2018
I asked, and you gave.
Gentlemen, thank you very much for the photos! Greatly appreciated. Keep 'em comin....
Just watched that slide show. Fricken awsome!!!!
Just watched that slide show. Fricken awsome!!!!
Last edited by zpmhinojosa; 01-23-2010 at 03:42 PM.
01-23-2010, 05:34 PM
#2020
Originally Posted by doriftu
does anyone have a good method to remove the stock alu suspension balls?
i want to replace them with the low friction ones and its a pain to remove the originals!
Thanks
i want to replace them with the low friction ones and its a pain to remove the originals!
Thanks
01-23-2010, 05:39 PM
#2021
has anyone had the need to mod the motor mount to fit larger spur/pinion combo's.
I run 48p as I've found the stock spur's pick up bit's of debris at our track, while the 48p is a little more forgiving.
I've currently got a 72 spur and 29 pinion, and with that fitted I don't see me being able to go any higher with either the spur or pinion which is a nuisance.
I'm just wondering if anyone has modded the mount and of so, how did you approach it.
Any information would be appreciated.
I run 48p as I've found the stock spur's pick up bit's of debris at our track, while the 48p is a little more forgiving.
I've currently got a 72 spur and 29 pinion, and with that fitted I don't see me being able to go any higher with either the spur or pinion which is a nuisance.
I'm just wondering if anyone has modded the mount and of so, how did you approach it.
Any information would be appreciated.
01-23-2010, 07:28 PM
#2022
Tech Regular
01-23-2010, 10:21 PM
#2023
Originally Posted by aussierevo
has anyone had the need to mod the motor mount to fit larger spur/pinion combo's.
I run 48p as I've found the stock spur's pick up bit's of debris at our track, while the 48p is a little more forgiving.
I've currently got a 72 spur and 29 pinion, and with that fitted I don't see me being able to go any higher with either the spur or pinion which is a nuisance.
I'm just wondering if anyone has modded the mount and of so, how did you approach it.
Any information would be appreciated.
I run 48p as I've found the stock spur's pick up bit's of debris at our track, while the 48p is a little more forgiving.
I've currently got a 72 spur and 29 pinion, and with that fitted I don't see me being able to go any higher with either the spur or pinion which is a nuisance.
I'm just wondering if anyone has modded the mount and of so, how did you approach it.
Any information would be appreciated.
01-23-2010, 11:45 PM
#2024
Originally Posted by aussierevo
has anyone had the need to mod the motor mount to fit larger spur/pinion combo's.
I run 48p as I've found the stock spur's pick up bit's of debris at our track, while the 48p is a little more forgiving.
I've currently got a 72 spur and 29 pinion, and with that fitted I don't see me being able to go any higher with either the spur or pinion which is a nuisance.
I'm just wondering if anyone has modded the mount and of so, how did you approach it.
Any information would be appreciated.
I run 48p as I've found the stock spur's pick up bit's of debris at our track, while the 48p is a little more forgiving.
I've currently got a 72 spur and 29 pinion, and with that fitted I don't see me being able to go any higher with either the spur or pinion which is a nuisance.
I'm just wondering if anyone has modded the mount and of so, how did you approach it.
Any information would be appreciated.
http://www.amainhobbies.com/product_...-Spur-Gear-67T
http://www.amainhobbies.com/product_...r-Gear-48P-69T
http://www.amainhobbies.com/product_...-Spur-Gear-60T
01-24-2010, 02:02 AM
#2025
thanks for the replies....I will have a go at making a small change to the motor mount but I think I will be limited by the space anyway.
I today had a run using the Kawada 72T spur and could get a 29T pinion in, and maybe a 30 will be a little bit more of a squeeze. I have got a 71 and 69 spur, so will give those a try......I've finally figured out how to rebuilt my diff each time and get a nice feel to it, so I'm not afraid to change the spur gear if need be.
I today had a run using the Kawada 72T spur and could get a 29T pinion in, and maybe a 30 will be a little bit more of a squeeze. I have got a 71 and 69 spur, so will give those a try......I've finally figured out how to rebuilt my diff each time and get a nice feel to it, so I'm not afraid to change the spur gear if need be.
