The Speed Passion Thread
#7111
Tech Champion
iTrader: (79)
V1.36 released
............and we are not going to support V1.35 anymore and thats why I removed the old version, and I will remove all the previous old version cause all the software we had so far are be found in the new V1.36
Stop using 1212 as this is not even close compare to the new 323STOCK software. Also, try the new 119MOD supercharger software for MOD motor.
Here is the link....you guys will love it. Make sure read the attached PDF file as this Supercharger improvement is alittle different then the previous 1.35 or 1.33 version.
http://www.speedpassion.net/us/escsetup.asp
I am in the middle of creating some setup for 17.5 13.5 motor...as well as some 8.5 10.5 for mod...all are using 323STOCK software (YES, 323STOCK software for MOD racing)...and mainly in OFF ROAD setup, but I have some on road indoor and outdoor setup as well....stay tuned.
Also, new 323stock and 119mod setup sheet....
http://www.speedpassion.net/files/Sp...k_6may2011.pdf
IMPORTANT: You must update the LCD programmer from the 1.36 version before you can see the changes for the 323STOCK, it is a must do process.
............and we are not going to support V1.35 anymore and thats why I removed the old version, and I will remove all the previous old version cause all the software we had so far are be found in the new V1.36
Stop using 1212 as this is not even close compare to the new 323STOCK software. Also, try the new 119MOD supercharger software for MOD motor.
Here is the link....you guys will love it. Make sure read the attached PDF file as this Supercharger improvement is alittle different then the previous 1.35 or 1.33 version.
http://www.speedpassion.net/us/escsetup.asp
I am in the middle of creating some setup for 17.5 13.5 motor...as well as some 8.5 10.5 for mod...all are using 323STOCK software (YES, 323STOCK software for MOD racing)...and mainly in OFF ROAD setup, but I have some on road indoor and outdoor setup as well....stay tuned.
Also, new 323stock and 119mod setup sheet....
http://www.speedpassion.net/files/Sp...k_6may2011.pdf
IMPORTANT: You must update the LCD programmer from the 1.36 version before you can see the changes for the 323STOCK, it is a must do process.
#7112
looks nicer too
#7115
Tech Champion
iTrader: (17)
#7116
dont need brakes in 0 timing mode , dont brake
i have my brakes at 50% on my transmitter and 100% in the speedo but this is only incase of emergencys
i have my brakes at 50% on my transmitter and 100% in the speedo but this is only incase of emergencys
#7118
Tech Champion
iTrader: (17)
http://www.speedpassion.net/us/produ...=SPLCD01&c=OPT
#7119
Tech Initiate
i tried the latest speedpassion firmware/software on my xray t3 last night had great speed out of corners but top end was not that good running fdr 7
v3 13.5 motor was set on 0 degrees so changed this to full 10 degrees what a difference so was so much faster down the straight well done speedpassion at last i have a car that can keep up with the leaders
v3 13.5 motor was set on 0 degrees so changed this to full 10 degrees what a difference so was so much faster down the straight well done speedpassion at last i have a car that can keep up with the leaders
#7120
Tech Champion
iTrader: (17)
i tried the latest speedpassion firmware/software on my xray t3 last night had great speed out of corners but top end was not that good running fdr 7
v3 13.5 motor was set on 0 degrees so changed this to full 10 degrees what a difference so was so much faster down the straight well done speedpassion at last i have a car that can keep up with the leaders
v3 13.5 motor was set on 0 degrees so changed this to full 10 degrees what a difference so was so much faster down the straight well done speedpassion at last i have a car that can keep up with the leaders
http://www.speedpassion.net/us/produ...SP000034&c=OPT
http://www.speedpassion.net/us/produ...SP000029&c=OPT
#7122
Tech Addict
Never 0* on V3 motor...at least, I never use 0*, always 10*. And you guys have not try these bad boys yet....
http://www.speedpassion.net/us/produ...SP000034&c=OPT
http://www.speedpassion.net/us/produ...SP000029&c=OPT
http://www.speedpassion.net/us/produ...SP000034&c=OPT
http://www.speedpassion.net/us/produ...SP000029&c=OPT
#7124
Tech Addict
#7125
temps with fan were Speedo 45 degreesC and motor with 2 fans 70 degreesC
i was laughing all night