The Speed Passion Thread
#6196
are you trying to ask, after the supercharger is engaged and you let off the throttle how do you control it, cause that doesn't even make sense. why do you need to control boost when off throttle? if you wanna know how do you control it after you let off then get back on, then that would be by the throttle delay you have set, or the rpm delay you have set....
or where you just trying to tell a joke and it went over like a fart in a submarine
btw, how about them links I asked for, you have any??
#6197
Tech Initiate
I have GT ESC V1.1-LPF Edition that I never used, my 1/12th track disappeared. I am going to run some 1/10th dirt at a new track and was wondering if I can update from V1.1 software. I don't see any mention of it on the website.
Looking to run 13.5/17.5 2S Lipo and Futaba 603FS.
Looking to run 13.5/17.5 2S Lipo and Futaba 603FS.
#6198
Tech Champion
iTrader: (17)
I have GT ESC V1.1-LPF Edition that I never used, my 1/12th track disappeared. I am going to run some 1/10th dirt at a new track and was wondering if I can update from V1.1 software. I don't see any mention of it on the website.
Looking to run 13.5/17.5 2S Lipo and Futaba 603FS.
Looking to run 13.5/17.5 2S Lipo and Futaba 603FS.
Time to upgrade to GT2.1 series.
#6199
Tech Initiate
thanks Solara...unlikely I will get GT2.1 though.
#6200
Tech Regular
iTrader: (3)
gt 2 no timing light where is it?
Hello. Need some help finding the flashing light that indicates Im running stock no timing on my gt 2.0.pro
Ive definetly changed my software no problem. Trouble is the only light I can find seems to be coming from the base, red when I throttle forward or backward.
User manual shows 2 leds green and red near the motor sensor cable that I dont seem to have on mine.
Thanks in advance!
Ive definetly changed my software no problem. Trouble is the only light I can find seems to be coming from the base, red when I throttle forward or backward.
User manual shows 2 leds green and red near the motor sensor cable that I dont seem to have on mine.
Thanks in advance!
#6201
Tech Master
iTrader: (5)
Hello. Need some help finding the flashing light that indicates Im running stock no timing on my gt 2.0.pro
Ive definetly changed my software no problem. Trouble is the only light I can find seems to be coming from the base, red when I throttle forward or backward.
User manual shows 2 leds green and red near the motor sensor cable that I dont seem to have on mine.
Thanks in advance!
Ive definetly changed my software no problem. Trouble is the only light I can find seems to be coming from the base, red when I throttle forward or backward.
User manual shows 2 leds green and red near the motor sensor cable that I dont seem to have on mine.
Thanks in advance!
#6202
Tech Champion
Hello. Need some help finding the flashing light that indicates Im running stock no timing on my gt 2.0.pro
Ive definetly changed my software no problem. Trouble is the only light I can find seems to be coming from the base, red when I throttle forward or backward.
User manual shows 2 leds green and red near the motor sensor cable that I dont seem to have on mine.
Thanks in advance!
Ive definetly changed my software no problem. Trouble is the only light I can find seems to be coming from the base, red when I throttle forward or backward.
User manual shows 2 leds green and red near the motor sensor cable that I dont seem to have on mine.
Thanks in advance!
#6203
Hello. Need some help finding the flashing light that indicates Im running stock no timing on my gt 2.0.pro
Ive definetly changed my software no problem. Trouble is the only light I can find seems to be coming from the base, red when I throttle forward or backward.
User manual shows 2 leds green and red near the motor sensor cable that I dont seem to have on mine.
Thanks in advance!
Ive definetly changed my software no problem. Trouble is the only light I can find seems to be coming from the base, red when I throttle forward or backward.
User manual shows 2 leds green and red near the motor sensor cable that I dont seem to have on mine.
Thanks in advance!
I'm guessing you're motor is connected properly, including sensor wire, correct?
#6204
Tech Champion
iTrader: (17)
For all the GT2 series ESC, when 508_no_timing software is loaded for no timing sportsman event, the bottom of the ESC, with the semi-clear bottom case, will spot the RED LED is on....the RED LED is the only indication when you are using the 508_no_timing software.
If you are running any OTHER software, there will be no LED lit at the bottom until it is on throttle or brakes.
GT2 circuit board was designed way before this NO TIMING thing happened. Our next generation ESC will have all the LED indication above or on the SIDE of the ESC.
If you are running any OTHER software, there will be no LED lit at the bottom until it is on throttle or brakes.
GT2 circuit board was designed way before this NO TIMING thing happened. Our next generation ESC will have all the LED indication above or on the SIDE of the ESC.
#6205
Tech Regular
iTrader: (3)
Ok so I double checked my software, uninstalled then reinstalled V1 508 no timing!
Set my throttle forward and back to %100
I have the clear bottom esc but still only have a red light when i throttle
no green at all
My motor sensor cable only has 5 conductors the original had 6! Could that be it?
Swapped sensor cable thats not it.
un installed program from computer then reinstalled using v1.33 nothing
Set my throttle forward and back to %100
I have the clear bottom esc but still only have a red light when i throttle
no green at all
My motor sensor cable only has 5 conductors the original had 6! Could that be it?
Swapped sensor cable thats not it.
un installed program from computer then reinstalled using v1.33 nothing
Last edited by DanOK; 12-10-2010 at 09:22 PM. Reason: Still trying!
#6207
Tech Champion
Ok so I double checked my software, uninstalled then reinstalled V1 508 no timing!
Set my throttle forward and back to %100
I have the clear bottom esc but still only have a red light when i throttle
no green at all
My motor sensor cable only has 5 conductors the original had 6! Could that be it?
Swapped sensor cable thats not it.
un installed program from computer then reinstalled using v1.33 nothing
Set my throttle forward and back to %100
I have the clear bottom esc but still only have a red light when i throttle
no green at all
My motor sensor cable only has 5 conductors the original had 6! Could that be it?
Swapped sensor cable thats not it.
un installed program from computer then reinstalled using v1.33 nothing
#6208
Hi all, have a question that hopefully you can help me with.
I'm running a Yokomo BD with a 6.5T Orion. Will the SP GT V2.1 EX be able to support this?
Thanks!
I'm running a Yokomo BD with a 6.5T Orion. Will the SP GT V2.1 EX be able to support this?
Thanks!
#6210