Tha Skinny

iTrader: (8)

I'm great man, Houston is awesome. Great group of guys down here to race with. So you end up getting it right then?

vadersing

iTrader: (8)

Can GT2.0 Pro Brushless ESC make use of the 100528 stock firmware with turbo boost?

g12314

iTrader: (6)

Yes.

san.

iTrader: (61)

Both my SP GT 2.0 Pro's are showing a solid LED when I upload the No Timing Stock firmware. According to the ROAR Rules, it's suppose to blink. Am I doing something wrong? I had to lend my programmer box to the race coordinator, so they can tech my car and others.

gdcopbdcop

san, i am going to race in the Castle Classic this week, in the non-ramping 17.5 class, with my 2.o pro. what motor are you using, and what timing are you using on the motor, and what is your final fdr? i am also racing my new tcx,(for the first time, cant wait).

thanks,

rich

san.

iTrader: (61)

I used a friend's Epic Duo 2 at max motor timing with a 3.48 FDR. We also had a heatsink with fan, so make sure to check your temp after 2min around the track.

Regarding the TCX for stock racing, I'm not sure you will be able to run an FDR that low. Unless you mod the motor mount. I used my Cyclone TC for that class.

defcone

iTrader: (15)

Did u recalibrate after upgrading(downgrading?) software?

san.

iTrader: (61)

I always make it a habit to calibrate after every change in firmware and/or settings. Dunno why, just do.

But still a solid red LED.

g12314

iTrader: (6)

I just switched my 2.0 LPF to the no timing firmware and the light will stay Solid until you turn your radio on. After you turn your Radio on, the light will blink and you can then turn your radio off and it will continue to blink. This was tested with my 3PKS FASST radio setup.

Jimmy

san.

iTrader: (61)

Thanks, Jimmy. I will confirm. ROAR should've added the "when in neutral" clause in their rules for the SP ESC's.

gdcopbdcop

thanks for the quick reply, i will check it out.

rich

Solara

iTrader: (17)

Thanks Jimmy....

bijono

@ Solara

I have my SP GT V2.1 EX Carbon....kit 416 WE... I will run BL 11.5 T

i read this on SP site :

Note:
GT2.1 EX "exit factory with preload 205MOD
software"
We are not recommended to use this GT2.1 EX ESC
with 100528stock... or any
Supercharged software on 2S/7.2V
powered Touring Cars....
Please consider using the GT2 series or
GT2.1 ProStock series for all
Touring Cars
application.


my Questions are....
so 528 supercharged stock software can't be used on this speedo... ?
so which software should i use for running stock 11.5 T ?... any competitive software should i download ? .... coz i don't want to buy any speedo... ...thanks for kindly help...

BanzaiScott

Is the 100528 Software installed on the 2.1 Pro ESC?

It's not stated on the USA website or King Golden site.

emerge

iTrader: (6)

If the DDRS is maxed out what is the next thing I should change to improve acceleration?