The Speed Passion Thread
#5496
Speed Passion Stock Firmware mid 2010
1) is Stock based Advanced Dynamic Timing (only) (3ver).
2) Stock Software Advanced Dynamic TIming with Supercharge (Timing)
with 2 type of Firmware 100422 and 100528. 2010/04/22 and 2010/05/28.
..
#5497
Tech Regular
iTrader: (7)
KK I found it under downloads for my speed control. It says this one the download though:
Program
Speed Passion USB Interface software V1.33 and software #100528
This for GT2.1 Prostock only !
You must use the new PC interface V1.33
Not being one to worry much, I threw it on my speedo anyways. It updated fine, should I be concerned or will it work fine?
PS: I have the gt2.0 LPF
Program
Speed Passion USB Interface software V1.33 and software #100528
This for GT2.1 Prostock only !
You must use the new PC interface V1.33
Not being one to worry much, I threw it on my speedo anyways. It updated fine, should I be concerned or will it work fine?
PS: I have the gt2.0 LPF
#5498
try to ask again
has sombody tryed the gm motors 13.5t on the sp speedos with stock software.
or do you now motors that didnt work on stock software.
i dith test the team powers 13.5 and it was not great.
alot of heat in it. had to turn down the setings and it was not fast with the setings down but cooler.
with the same setings as with my 13.5 sp motor it was fast but hot after 2 min.
has sombody tryed the gm motors 13.5t on the sp speedos with stock software.
or do you now motors that didnt work on stock software.
i dith test the team powers 13.5 and it was not great.
alot of heat in it. had to turn down the setings and it was not fast with the setings down but cooler.
with the same setings as with my 13.5 sp motor it was fast but hot after 2 min.
#5501
Tech Master
iTrader: (5)
try to ask again
has sombody tryed the gm motors 13.5t on the sp speedos with stock software.
or do you now motors that didnt work on stock software.
i dith test the team powers 13.5 and it was not great.
alot of heat in it. had to turn down the setings and it was not fast with the setings down but cooler.
with the same setings as with my 13.5 sp motor it was fast but hot after 2 min.
has sombody tryed the gm motors 13.5t on the sp speedos with stock software.
or do you now motors that didnt work on stock software.
i dith test the team powers 13.5 and it was not great.
alot of heat in it. had to turn down the setings and it was not fast with the setings down but cooler.
with the same setings as with my 13.5 sp motor it was fast but hot after 2 min.
and the only motors that ive heard dont sc sp is lrp vector x11/x12 havent heard of any others
#5502
Tech Elite
iTrader: (6)
KK I found it under downloads for my speed control. It says this one the download though:
Program
Speed Passion USB Interface software V1.33 and software #100528
This for GT2.1 Prostock only !
You must use the new PC interface V1.33
Not being one to worry much, I threw it on my speedo anyways. It updated fine, should I be concerned or will it work fine?
PS: I have the gt2.0 LPF
Program
Speed Passion USB Interface software V1.33 and software #100528
This for GT2.1 Prostock only !
You must use the new PC interface V1.33
Not being one to worry much, I threw it on my speedo anyways. It updated fine, should I be concerned or will it work fine?
PS: I have the gt2.0 LPF
#5503
my sheets are encrypted, i don't know the program that you are using (distiller??) Try to use Acrobat Reader 9.xx or Foxit Reader 4.1. I have both and both are working. Foxit is free and very small respect Acrobat Reader. Sheets are build for to be compatible with the 9,xx version of Acrobat reader or above. A friend of mine had a similar problem with a PC...and with the exactly the same software on another pc was working. I suggest you to try Foxit , it is small about 10Mb and is full compatible. Hoping this can help you otherwise contact me by pm and will try to solve this issue
#5504
SC Punch #15
.. found the answer
Last edited by Me_MrTyson; 09-04-2010 at 12:31 AM.
#5505
Tech Regular
now betraying my memory ..
What was it now. the solder to the capacitor esc. it was red to battery ( + ) and black to the battery ( - ) ?
What was it now. the solder to the capacitor esc. it was red to battery ( + ) and black to the battery ( - ) ?