The Speed Passion Thread
#5221
#5222
dith one off you tryed to use the 528 stock software on the gt2.0 pro speedo.
the site says only for 2.1 prostock.?
the site says only for 2.1 prostock.?
#5223
Tech Regular
Hi,
I was reading through the 'Basic Starting Setups for Supercharger Software' and it says,
I'm also using the SP motors, so does this mean I could set the motor timing to 0deg and then the timing on the esc to option 5 (15,00) or could I also leave the the motor at 5deg and the speedo to option 4 (11,25) giving approximately 15deg is this still the same thing ?
Sorry but trying to understand more about timing and all these esc settings
I was reading through the 'Basic Starting Setups for Supercharger Software' and it says,
I'm also using the SP motors, so does this mean I could set the motor timing to 0deg and then the timing on the esc to option 5 (15,00) or could I also leave the the motor at 5deg and the speedo to option 4 (11,25) giving approximately 15deg is this still the same thing ?
Sorry but trying to understand more about timing and all these esc settings
found them very hard to understand and the car was soo slloooww no mater what I geared it too, so decided to follow the 'Word' guide can't remember the name but that suggests a gearing of 7.0 - 6.5 which I found worked very well.
What confused me on these instructions was for 10.5t it suggests 5.5 - 6.0fdr, I thought it would need to be geared higher eg 7.0 - 8.0 for the lower turn motors
#5224
#5225
oke
i have now v1.06-100617
i have now v1.06-100617
#5230
#5231
#5232
thanks.
wil try it
wil try it
#5234
Tech Adept
Hi is it possible to run the Stock 2.1 without the cooling fan when running 13.5?