57LikesThe Speed Passion Thread
03-28-2010, 12:45 PM
#3557
Last edited by skypilot; 03-28-2010 at 06:36 PM.
03-28-2010, 12:47 PM
#3558
Last edited by skypilot; 03-28-2010 at 06:36 PM.
03-28-2010, 01:23 PM
#3559
My mate has an original SP GT esc, sure it still has the feagio? sticker on the side. Is there a firmware upgrade path for this esc or is he stuck with what he has?
03-28-2010, 01:51 PM
#3560
if its the first version, 1.0 then no its not upgradeable. i believe 1.1 was but had to be sent in, 2.0 and 2.1 you can do yourself with the right equipment
03-28-2010, 02:21 PM
#3561
ok, so, some pages back now, some where around page 205 or something is a public software for everyone to try,I believe THAT IS the 318 software there are instuctions on how to install it, there is information on basic setups and what each new fuction is and how to use it. I'm not sure what all the fuss is about. ok some guy forwarded a copy to a buddy to test the lastest private software release, apparently without telling him to keep it himself and off the internet. so 318 is out there on this thread with info on how to install it and use, Mr. Cherry did spend some time and on another thread and link and gave really really good instructions for installing it.....
My answer to you...
not really.Lets stop this BS and go back to the software/setup. We are still trying to match V203 and SXX.....
03-28-2010, 02:25 PM
#3562
03-28-2010, 02:36 PM
#3564
Last edited by skypilot; 03-28-2010 at 06:37 PM.
03-28-2010, 02:48 PM
#3565
. I have a Speed Passion Version 2 Carbon Edition a Hobbywing 120 amp Version 2 & and a Venom 120 amp Version 2. Which thread am I allowed to post on?
03-28-2010, 04:22 PM
#3568
ok, so, some pages back now, some where around page 205 or something is a public software for everyone to try,I believe THAT IS the 318 software there are instuctions on how to install it, there is information on basic setups and what each new fuction is and how to use it. I'm not sure what all the fuss is about. ok some guy forwarded a copy to a buddy to test the lastest private software release, apparently without telling him to keep it himself and off the internet. so 318 is out there on this thread with info on how to install it and use, Mr. Cherry did spend some time and on another thread and link and gave really really good instructions for installing it, I went thru it, found it helpful and correct, again I'm not seeing the problem, Mr. Cherry has also posted several of his setup sheets with his findings, which I find useful, again, not seeing the problem. apparently from reading Mr. cherrys posts and others, there is a issue with him which i am not aware of, nor do i care to be aware of. AT THIS TIME he seems to be trying to help his fellow racers, so whatever those other issues were it may be time to get over them. I don't have a full time track to do any testing so the more people helping to get this figured out will be giving me a head start when outdoor season does start.
thanks to SP/Shawn for all they have done for us, and thanks go out to EVERYONE that is helping make OUR racing better thru there testing.
thanks to SP/Shawn for all they have done for us, and thanks go out to EVERYONE that is helping make OUR racing better thru there testing.
03-28-2010, 06:12 PM
#3569
What software should I run in a 2wd buggy running 13.5 and occasionally 10.5?
Where are the software profiles at? I can't seem to find them on the SP sites. Do I need to register to get to the different software profiles downloads?
EDIT.
I have downloaded the the 1.32v software on my Lap top and the 1.31v on the PC from the website just to see if there was a difference. The LCD box says 1.02 on start up. The database says 1.35.
Am I doing something wrong?
I don't see profile 230 and 231, which I was told to try when I turn the esc on and get to look for profiles. Most profiles say 1.01v and a bunch of numbers. I assume when you say profile 107 that is the last three digits?
Where are the software profiles at? I can't seem to find them on the SP sites. Do I need to register to get to the different software profiles downloads?
EDIT.
I have downloaded the the 1.32v software on my Lap top and the 1.31v on the PC from the website just to see if there was a difference. The LCD box says 1.02 on start up. The database says 1.35.
Am I doing something wrong?
I don't see profile 230 and 231, which I was told to try when I turn the esc on and get to look for profiles. Most profiles say 1.01v and a bunch of numbers. I assume when you say profile 107 that is the last three digits?
Last edited by Scrad; 03-28-2010 at 09:27 PM.
03-28-2010, 06:32 PM
#3570
like i said not trying to start a pissing match, just trying to make nice,
go team
And I apologize to Shawn and the rest of the Team for even getting involved in this whole crying match. I guess trying to break up a bitch fest was wrong
I'll just go delete my posts now, and keep all communication to emails with Shawn.
go team
And I apologize to Shawn and the rest of the Team for even getting involved in this whole crying match. I guess trying to break up a bitch fest was wrong
I'll just go delete my posts now, and keep all communication to emails with Shawn.