rc-man

I just got a V1.1 in my car last week, so far so good. Friend of mine had one for 50-60 packs now and it seems ok as well. (we both running mod 4wd touring) Heard the new one they make some changes inside to makes it more reliable. Only time will tell......

valk

iTrader: (13)

For Reventon Stock Club, is there a way to program the brakes without the program card? manual stops after drrs and says it comes programed for 30% brakes. that just isnt enough.. took like 30 ft to stop with a 17.5 lol.

Yogi-

Yes you can do it with the button. The manual has the directions for the beeps and light flashing. Think it's page 11

valk

iTrader: (13)

yes but if you look at the manual, it doesnt show you how to get to brakes.

Yogi-

There's a program list there for the stock esc it will show you the number to go up to ( by pressing the button for 3sec for ech setting to move on to the next step) it will also tell you what Is the stock setting. You just continue on till you get to the bit you want to change. It's hard to explain but once you do it it will make sense

The program list is on the next couple of pages.

valk

iTrader: (13)

I figured out the DRRS setting i think.. you just turn the esc off to set the setting? i cant seem to find the brake function by waiting for 4/5/6 orange flashes. at least i cant see any difference after "setting those"

Yogi-

When the orange led flashes 4 times release the button your now on the brakes . Press the button once,the red led will flash 1 for 8%. 2 10% 3 20%,4 is 30%. 5,6,7,8,9,10, and 11 for 100% press the button when the led your looking for flashes. Hope this helps

Manny

Does anyone know where I can get a programming box for the Cirtix ESC? Have they been discontinued?

valk

iTrader: (13)

so i hold the button until the specified number of orange beeps. then do i push the button once or wait for the number of red beeps and turn the esc off? clicking the button doesnt seem to do anything afte ri release on the orange beeps. bleh. annoying programming lol.

Yogi-

Yes hold the button till you get to 4 orange beeps. The next red beeps are what is already programmed. Then you press the button to start. Wait till you get the numer of red beeps you want then press the button again. Jobs done
You may need to recalubrate the transmitter when your done.

valk

iTrader: (13)

is it supposed to go beep-beep-beep or beepbeepbeep? i dont see any difference in the tone or code of the beeps. just beeps continuously after i release the button from the orange state.

yodace

iTrader: (8)

will the LCD program box and speedpassion program work with windows xp..?

I cant seem to get it to work....

IIGQ4U

iTrader: (53)

Try starting from this page:

http://www.rctech.net/forum/electric...hread-764.html

yodace

iTrader: (8)

will the lcd card and speedpassion program work on windows xp?

I installed the usb driver and still cant get the program to work.any suggestions?

IIGQ4U

iTrader: (53)

Did you not read what I just posted?

Yes, they will work just fine.