R/C Tech Forums

Go Back  R/C Tech Forums > General Forums > Electric On-Road
The Speed Passion Thread >

The Speed Passion Thread

Register
FAQ
Community
Wiki Posts
Calendar
Today's Posts
Search
Vendor Directory
Like Tree57Likes

The Speed Passion Thread

Thread Tools
 
Search this Thread
 
Old 01-13-2013, 03:17 AM
  #10981  
Tech Rookie
 
quickershifter's Avatar
 
Join Date: Feb 2011
Posts: 18
Default
I just bought a new SP Ver.3 motor 17.5T, hooked it up to my SP Rev Pro but no throttle (motor not turning). Try to calibrate the ESC after firmware v22 updated, no beep sound in the ESC, but the orange led blinks. I can feel the motor staggering but no turns. Any advice on this?
quickershifter is offline  
Reply
Old 01-13-2013, 05:45 AM
  #10982  
Tech Fanatic
iTrader: (13)
 
Airflow's Avatar
 
Join Date: May 2005
Location: Manila
Posts: 823
Trader Rating: 13 (100%+)
Default
I've been running a novak high rev 10.5 ballistic motor the whole day like 5 packs on my Reventon R with boost. No shut down whatsoever.
Airflow is offline  
Reply
Old 01-13-2013, 06:06 AM
  #10983  
Tech Fanatic
iTrader: (13)
 
Airflow's Avatar
 
Join Date: May 2005
Location: Manila
Posts: 823
Trader Rating: 13 (100%+)
Default
Hi solara, do I need to upgrade my Reventon R firmware to the one you posted? I'm using stoc01

What's the benefit of upgrading to this new firmware anyway?
Airflow is offline  
Reply
Old 01-13-2013, 12:56 PM
  #10984  
Tech Adept
 
Join Date: Sep 2012
Posts: 211
Default
Airflow the v 20 stock1 firmware is only for the pro at the moment not sure if its being release for the r but the new firmware is meant to help mid power

If any of the sp boys could tell us about if the r gets the shock1 v20 ?
tcboy1983 is offline  
Reply
Old 01-13-2013, 01:06 PM
  #10985  
Tech Apprentice
iTrader: (5)
 
ChrisNRG's Avatar
 
Join Date: Mar 2012
Location: NJ
Posts: 71
Trader Rating: 5 (100%+)
Default
Will the Reventon Sock Club work with a Trinity Revtech 17.5t or D3.5 17.5t motor?
ChrisNRG is offline  
Reply
Old 01-13-2013, 02:17 PM
  #10986  
Tech Apprentice
 
Join Date: May 2009
Location: London
Posts: 83
Default
Well, the new program for the pro has definatley sorted out the mid range problems. However, the brakes have now become too soft so, well done but please keep at it.
RSCosworth is offline  
Reply
Old 01-13-2013, 06:16 PM
  #10987  
Tech Adept
 
BigC123's Avatar
 
Join Date: Jan 2008
Location: Fort Worth Tx.
Posts: 160
Default
Well got my replacement Reveton Pro in and noticed that it looks like they tightened the case to hard because , it is cracked around the screws, is there a way I can order a new bottom for the ESC, I sure don't want to send it back, I just waited two weeks for this one. Any suggestions anyone?
BigC123 is offline  
Reply
Old 01-13-2013, 06:31 PM
  #10988  
Tech Apprentice
 
Join Date: Sep 2012
Posts: 72
Default
Originally Posted by quickershifter
I just bought a new SP Ver.3 motor 17.5T, hooked it up to my SP Rev Pro but no throttle (motor not turning). Try to calibrate the ESC after firmware v22 updated, no beep sound in the ESC, but the orange led blinks. I can feel the motor staggering but no turns. Any advice on this?
Try to change the sensor cable.
WMGary is offline  
Reply
Old 01-13-2013, 06:48 PM
  #10989  
Tech Initiate
 
Join Date: Jan 2007
Location: Toronto
Posts: 37
Default
Originally Posted by Solara
Did I answered your PM...? If not...I did not receive your PM, please send again...



Did I answered your PM...? If not...I did not receive your PM, please send again...
I just resend my pm...thanks!
X men is offline  
Reply
Old 01-13-2013, 06:56 PM
  #10990  
Tech Fanatic
iTrader: (13)
 
Airflow's Avatar
 
Join Date: May 2005
Location: Manila
Posts: 823
Trader Rating: 13 (100%+)
Default
Originally Posted by tcboy1983
Airflow the v 20 stock1 firmware is only for the pro at the moment not sure if its being release for the r but the new firmware is meant to help mid power

If any of the sp boys could tell us about if the r gets the shock1 v20 ?
Thanks for the info man. I wont be upgrading after all.
Airflow is offline  
Reply
Old 01-13-2013, 07:24 PM
  #10991  
Tech Apprentice
 
Join Date: Sep 2012
Posts: 72
Default
Originally Posted by RSCosworth
Well, the new program for the pro has definatley sorted out the mid range problems. However, the brakes have now become too soft so, well done but please keep at it.
If you are using Stock1 V20, set initial brake force to 30-50%.
WMGary is offline  
Reply
Old 01-13-2013, 09:04 PM
  #10992  
Tech Master
iTrader: (45)
 
JoeyE's Avatar
 
Join Date: Oct 2005
Location: SF Bay Area, CA
Posts: 1,904
Trader Rating: 45 (100%+)
Default
Originally Posted by PitNamedGordie
I had the same issue on my first run with the Pro. The default brake setting is set at 30%. You are going to have up this to feel the brakes...
Thank you~!
JoeyE is offline  
Reply
Old 01-14-2013, 04:40 AM
  #10993  
Tech Rookie
 
quickershifter's Avatar
 
Join Date: Feb 2011
Posts: 18
Default
WMGary, I have try using another sensor cable, but still no turn on my motor. Do I have to change the capacitor? Or should I send it back and claim for warranty? But how?
quickershifter is offline  
Reply
Old 01-14-2013, 08:34 AM
  #10994  
Tech Elite
iTrader: (84)
 
Join Date: Oct 2006
Location: Snohomish, WA
Posts: 4,104
Trader Rating: 84 (100%+)
Default
Selling my 2 raceday old reventon pro. Pm me if interested.
jeff jenkins is offline  
Reply
Old 01-14-2013, 07:29 PM
  #10995  
Tech Apprentice
 
Join Date: Sep 2012
Posts: 72
Default
Originally Posted by quickershifter
WMGary, I have try using another sensor cable, but still no turn on my motor. Do I have to change the capacitor? Or should I send it back and claim for warranty? But how?
Send it back. You can contact USA support firstly.

Email: [email protected]

RMA

http://www.speedpassion.net/us/rma_form.asp

"Login requested"
WMGary is offline  
Reply



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.