The Speed Passion Thread
Super Moderator
iTrader: (239)
Tech Apprentice
Tech Elite
iTrader: (80)
reventon for 1s 12th scale racing 13.5 blinky
Q:
1. which reventon esc supports 1s lipo(no rx booster needed)?
2. if I get the reventon stock club or reventon s will i need a rx booster?
thanks again Speed Passion USA
1. which reventon esc supports 1s lipo(no rx booster needed)?
2. if I get the reventon stock club or reventon s will i need a rx booster?
thanks again Speed Passion USA
Super Moderator
iTrader: (239)
Tech Addict
iTrader: (1)
Just got the reventon r.
Trying to use the pc interface however after plugging everything in it is just sitting on the opening window "please connect esc".
What am I missing?
I held down the value button upon plugging in as well.
D.
Trying to use the pc interface however after plugging everything in it is just sitting on the opening window "please connect esc".
What am I missing?
I held down the value button upon plugging in as well.
D.
Tech Regular
iTrader: (14)
If your trying to do this with a mac,you need to run the drivers on a windows pc.
Hope this helps.
"let's go rangers" Messier,Richter,Gretzky,ahhhh them were the days!
Tech Apprentice
[QUOTE=Radio Active;11338588]I'm trying to find the sweet spot for a Speed Passion 1 cell 10.5 in blinky 12th.
We can inquired during the week. Unfortunate Wendi not control the approval time.
The 12.5 rotors are optional.
I have seen them run with zero problems at the track.
The 1s version of the Revention is not yet released.
Is your fan unplugged from the ESC when doing this process? That may be causing your reading problems.
I have seen them run with zero problems at the track.
Is your fan unplugged from the ESC when doing this process? That may be causing your reading problems.
any SP drivers coming to the Timezone GP next month??
Tech Addict
iTrader: (10)
Hi guys i was wondering what the Cirtix D-Manager Combo Sets are like, are ther reliable etc? do they have many problems? I was looking to run one im my HPI Drift car..
Tech Regular
iTrader: (14)
Not Approved Yet
Check the above post,think it will be a bit risky as you guys may be using hardware and software that isn't roar approved yet,and may result in a DQ.......hope it gets the nod before at least Friday for you.
Tech Fanatic
iTrader: (6)
I had a brief read of the AARCMCC rules last night and didn't see any mention of ROAR approval being required for speedies. As timing/boost are open in stock and mod I don't think they would require approval.I will certainly be having a good look at the rules when I get a chance.
Tech Addict
iTrader: (26)
hey guys any help here
Ive got the reventon pro and it worked fine until i went to adjust settings using my iphone and now the esc wont work at all
Ive got the reventon pro and it worked fine until i went to adjust settings using my iphone and now the esc wont work at all
I have SpeedPassion 1/10 Competition MMM series 10.5R Brushless Motor and Reventon R ESC.
My car just doesn't seems to brake when I push the trigger all the way out. When the trigger is on neutral zone, my car seems to brake just a bit. Is the brake function when the trigger on neutral position or when we push the trigger? I've calibrate the ESC with my transmitter on REV, try different running mode, but still I can't apply brake on my car.
I've read on a couple post but I can't find a solution. Sorry if it's discussed before.
My car just doesn't seems to brake when I push the trigger all the way out. When the trigger is on neutral zone, my car seems to brake just a bit. Is the brake function when the trigger on neutral position or when we push the trigger? I've calibrate the ESC with my transmitter on REV, try different running mode, but still I can't apply brake on my car.
I've read on a couple post but I can't find a solution. Sorry if it's discussed before.
Super Moderator
iTrader: (239)
I have SpeedPassion 1/10 Competition MMM series 10.5R Brushless Motor and Reventon R ESC.
My car just doesn't seems to brake when I push the trigger all the way out. When the trigger is on neutral zone, my car seems to brake just a bit. Is the brake function when the trigger on neutral position or when we push the trigger? I've calibrate the ESC with my transmitter on REV, try different running mode, but still I can't apply brake on my car.
I've read on a couple post but I can't find a solution. Sorry if it's discussed before.
My car just doesn't seems to brake when I push the trigger all the way out. When the trigger is on neutral zone, my car seems to brake just a bit. Is the brake function when the trigger on neutral position or when we push the trigger? I've calibrate the ESC with my transmitter on REV, try different running mode, but still I can't apply brake on my car.
I've read on a couple post but I can't find a solution. Sorry if it's discussed before.
Tech Addict
iTrader: (27)
cheers Marcos. can i trouble you to post it again please? I've went back 20+ pages and couldnt find it