The Speed Passion Thread
Tech Addict
iTrader: (38)
Mine works fine under Windows 7. Updating the card on with version 17 gives me one choice, v1.3. After installing this, the programmer shows the same issue as before in the fact that the display no longer works. It connects to the ESC through the computer fine though and setting the ESC/updating the program is seemless.
Super Moderator
iTrader: (239)
At the track so far so good 7.5v3 with 90% boost = ballistic
Fdr 7.6 temps in the Florida heat 136degrees
Fdr 7.6 temps in the Florida heat 136degrees
Super Moderator
iTrader: (239)
Darn I wanted to try out the 4.5 but I left it at home
So far the 7.5 and 10.5 are very fast temps are staying under 140 . Software is very easy to use and tune very smooth also.
So far the 7.5 and 10.5 are very fast temps are staying under 140 . Software is very easy to use and tune very smooth also.
Tech Elite
iTrader: (125)
Ok.
Go to your user control panel,select add remove program's.
Get rid of what you have downloaded,restart pc.
Go to speedpassion,download the interface/ program.
Get hold of another pc/ laptop/phone or whatever and follow that video to the letter.
Then at the end you update the LCD programmer by holding in the reset button AND plugging into USB port.
It will then say on the programmer " UPDATE FIRMWARE"...click "yes".
It will take approx 4-5 minutes.
And yes I'm running windows for this process.
If it doesn't work,we will have to organise a Skype conversation so I can show you how to do it.
Or I'll fly over...LOL
Good luck,let me know how you go.
Wipe that pc first!!!!!
Regards
Tim Phillips
Mobile: 0416973325
Go to your user control panel,select add remove program's.
Get rid of what you have downloaded,restart pc.
Go to speedpassion,download the interface/ program.
Get hold of another pc/ laptop/phone or whatever and follow that video to the letter.
Then at the end you update the LCD programmer by holding in the reset button AND plugging into USB port.
It will then say on the programmer " UPDATE FIRMWARE"...click "yes".
It will take approx 4-5 minutes.
And yes I'm running windows for this process.
If it doesn't work,we will have to organise a Skype conversation so I can show you how to do it.
Or I'll fly over...LOL
Good luck,let me know how you go.
Wipe that pc first!!!!!
Regards
Tim Phillips
Mobile: 0416973325
Last edited by kwiksi; 09-30-2012 at 07:32 PM.
Super Moderator
iTrader: (239)
After running the reventon pro in the Florida heat I added a sp fan on the side of the esc it dropped the heat temps by almost 20 degrees
Woo! Proven intercooler design!
Super Moderator
iTrader: (239)
Tech Regular
iTrader: (14)
Super Moderator
iTrader: (239)
The 10.5 felt like a strong 5.5 motor
Super Moderator
iTrader: (239)
Tech Addict
iTrader: (38)
I tried the 17.5 MMM at a 95 rollout with stock timing and the car felt flat. Dropped it closer to what I run my 1 cell at and it woke up on the infield without losing any speed on the straight. I didn't get a chance to play with timing but likely will during the IIC practice. My question is, what difference will I notice with more timing. Will I get more punch or more speed if I leave the gearing the same. Motor temp was only 120 with the 95 rollout and 106 at the lower. The 1 Cell generally comes off at around 98ish. In case anyone is wondering, the lower roll out was 2 tenths faster each lap overall.
Tech Elite
iTrader: (124)
How lomg did it take to get your esc's from SP to the US from outside the states? I want to order a couple but not sure they will be here for this weekend if I did. Anyone know?
Tech Master
iTrader: (31)
I'd say from outside us, not going to happen. And to be honest not a good chance at all even from the us warehouse.. I usually get my orders from us site in about 6-8 days or more... They take a day or two to process your order and then off to shipping...
Tech Elite
iTrader: (98)
i ordered mine from rcmodel.hk.........i got mine in 4 days via ems.....but i do live in australia though......im guessing you would have to wait a minimum of a week maybe more
Tech Adept
iTrader: (5)
i've gotten shipments from EMS (rcmart.com order) to Canada in 4 days too, fast shipping .. if you can find what you need in HK and need it quick and are willing to pay the $$, you should get it in time ..