Cain

iTrader: (294)

got a link to where you can get the TQ Booster in the USA?

Also, by black boards, are these the ones that the motors come with stock?

Marcos.J

iTrader: (239)

Black boards come on the mod motors 10.5 and under , 13.5 stock comes with the red , not sure about 17.5

Timbo99

iTrader: (14)

What Blade072 said.
David really knows his stuff so if you follow his suggestions you can't go wrong.
Feel free to ask me anything,or pm me if you think the topic has been asked before.
Regards
Tim

replicom

Thank you, for all your help!

Slayer1904

iTrader: (9)

Reventon Pro Question.

I just picked up a Reventon Pro from my local dealer, soldered it up and it worked perfect. Went to test today and all get is stearing but no throttle. Solid orange light and a blinking red light. Manual says its a voltage issues so I've tried 2 different batteries only to get the same thing, Both are fully charged, and 2 different brands.

I've tried recalibrating, reversing throttle on my 4PKS and still nada.

Any help would be great, running the stock 0 program.

MMM v3 17.5 motor

Marcos.J

iTrader: (239)

make sure that the wires coming to the receiver from the esc to the receiver are correct , negative to negative positive to positive, they are black i had similar issue if thats not it check the sensor wire

Slayer1904

iTrader: (9)

Thanks for the quick reply.

I just tried both and still get the same thing. One thing I have notice is that it's fine until I plug it into my RX. As Soon as I do that it pops the red blinking light.

(not sure if that helps) I'm going to try another RX and see if that's any help.

Slayer1904

iTrader: (9)

Put software back to factory defaults and re-calibrated, don't get the LVC light but still not throttle.

luckily i'm used to castle issues so my patience threshold is pretty high

Cain

iTrader: (294)

i have to say,I really wish speed passion didn't go to those all one color wires.

vr6cj

iTrader: (124)

Thought these Reventon Pro where suppose to be here stateside last week? I see nothing on the websight.

NewWestF1

iTrader: (5)

so after many emails and attempts to order a Ultra Sportsman v.3 17.5 i've found out that SP and their FedEx calculator doesn't consider Canada part of North America ........ and apparently won't until the end of the month.

Can someone point me to a SP distributor that will ship to Canada so i can get this motor. Thanks.

Timbo99

iTrader: (14)

Try Walter hobby store (distributor for speed p in oz),they are in Sydney.
Google it and ask for Jay.
Regards
Tim

Timbo99

iTrader: (14)

Ok.Seven emails direct to S/P.
4 times here.
I know software is being developed........and tested.....isn't it?
GT 2.0, your going to be needed for awhile I think.
The Reventon pro looks good.
Yay.

Lone_Drifter

iTrader: (10)

WWW.tqcells.com

Cain

iTrader: (294)

Thanks . got one on the way with a package but good to know.