Pretty sure they never came out with a app for programming..

The application exists, but cannot be found on the network.

Ah gotcha, over the last while no one has really gotten a straight answer if SP is still up and operational.. some say yes but no way of contact or updates anywhere. A lot of program cards around though.

Please, send me [email protected]

Can't seem to find my old files either, not sure if i had 2.7 on my led box but i know i had a firmware on my ESC that allowed all the parameters i wanted for bashing. If anyone can share old Reventon R stuff, let me know!

Thanks!
Jake

files sent

Anyone encountered a problem with the reventon pro 1.1 suddenly cutting off power then resuming after a sec or two?

Have you disabled the Temp and battery cut? I would try turning off the Voltage cut and Temp cut and try it.
(Set a timer of 5 min and check temps , then another 5 and see how it works.)

I wouldn't exceed 10-12 min on a continuous run.

I found a race and practice is never more than 10 min, Well below the capacity of my battery, so I NEVER run a pack totally dead.



MOmo

check your power cap

I know its a long shot, but are there any green, yellow, or blue sensor boards floating around out there for the v3.0 motors?

https://cimg3.ibsrv.net/gimg/www.rct...05c3794aa5.jpg
I used to use SP esc's and motors, but stopped when they seemingly went out of business.
I still have some of their products, looked in my garage and found a green, blue and red sensor. The yellow is still in the motor of a car my son runs in a novice class.
How can you tell if these are for V3 motors? -if you can use them PM me and I'd be happy to sell them to you. They are all in working condition and barely used.
(see photo)

actually if there is no way of knowing from the boards if your interested I can take the motor out of my son's car (it will have the V2 or V3 marking on the motor). -which will tell me what motors these boards were for. (if it makes any difference they were used in a 21.5 SP motor. -I don't recall if the boards could be used across various motor sizes).

The boards were used across all of the v3.0 and MMM motors. I have no idea if they had replaceable timing sensor boards for the v2.0 motors. Those appear to be the correct boards for the v3.0. I've got the 21.5 and 17.5 motors myself. Bought them years ago and boxed all my stuff in 2014 and been sitting ever since. Time to dust it all off.

I'm definitely interested in all of the ones you're willing to give up. :)