Originally Posted by Solara (Post 12203581)

4 final, yellow board middle to high position (depends on turns and straight lenght).....using Superior $30 power fan (for all my TC, this fan is a standard MUST HAVE feature now...)

Originally Posted by IIGQ4U (Post 12203690)

How about the R1 Wurks fan. It's half the price, is a real beast of a fan and is 30x30x15mm as well.

Originally Posted by HappyOne (Post 12210684)

I just picked a competition V3.0, 17.5R/Reventon Stock Club Race ESC combo to run in the Spec R S1 I am building. I also bought the LED programming card at the same time. I have downloaded the PC interface software (v1.1.0.22) and installed the USB drivers. I have been able to get the software to recognize and update the firmware on the LED card to V1.4 and I can connect the card to the ESC and read/program some of the variables but cannot get the PC software to work with the ESC, (via the LED card).

What might I be doing wrong?

btw, the computer is using win7 32bit.

Thanks.

Originally Posted by Xpress (Post 12206149)

Yeah, and if you try to crush the two in a vice to see which has the stronger case the R1 comes out on top.....like that matters. :rolleyes:

Originally Posted by WMGary (Post 12211193)

Stock Club Race is no PC connection. Therefore, you cannot get the Stock Club Race work with the PC software.

Originally Posted by Timbo99 (Post 12190842)

The Speedpassion software IS NOT RIGHT.
I was hoping my " muchmore" related post would prompt a response from Solara or a SP Tech.
This is a joke.
That's why I've uploaded the MM software to my SP LCD box and wow.

Chalk and cheese.....
I then bought a Fleta 4 esc.

And that's why I shared what I did because it worked,I have spent excess of $$$$$ with Speedpassion,I trusted and waited,waited,waited,now there is nobody who helps you guys with your issues.

Pretty lame.
I still believe this software is in a somewhat of a beta stage.
The GT2 & 2.1 are fine.
I may be selling a reventon pro to a friend,but I will recommend running the MM software.
The product is awesome,just get the software/ firmware right!

Regards guys,
Tim

Originally Posted by ikpthegame (Post 12210089)

Ok so I have a Reventon Pro, and after I sync it with the remote it turns off. You turn it back on and there is no response. I just sent one in to get replaced that did this and that one went up in smoke. Does anyone got a clue as to whats going on here? And yes the receiver works.

Originally Posted by Timbo99 (Post 12213781)

Hi,
When you say "sync it with remote"...what do you mean?
Are you syncing it with a remote wifi or Bluetooth?
Or do you mean when you turn your transmitter on?...I'll try and help best I can.
Regards
Tim

Originally Posted by Holmenkollen (Post 12217685)

Can I read out max temp on the ESC after a run or is it just the current temp?