|
what voltage should my lipo cutoff be at?
a 7.4V Trakpower 5400 Gold Lipo |
kriiiss
Ive only just got mine and I run 40c 7.4 intellect and I set it at 3.0v per cell. I hope its right. I have a question tho, the gt2.0 comes with max timing advance as standard setting, Im running mod 4.5 so I turned timing off. Did I do the right thing? cheers |
Originally Posted by kriiiss
(Post 6469141)
what voltage should my lipo cutoff be at?
a 7.4V Trakpower 5400 Gold Lipo |
Hi Adam,
i'm new to SP product, just got 11.5R comp3.0. i want to know, what is the 11.5R v2.0? is that the "Ultra Sportsman" series? because i never saw 11.5R comp2.0, or do i miss something? |
Originally Posted by krat
(Post 6469858)
Hi Adam,
i'm new to SP product, just got 11.5R comp3.0. i want to know, what is the 11.5R v2.0? is that the "Ultra Sportsman" series? because i never saw 11.5R comp2.0, or do i miss something? |
Example of a version 2 motor
http://lakecityquietpills.com/photo/...0282481538.jpg Example of a version 3 motor http://lakecityquietpills.com/photo/...0688425666.jpg |
Ok, thanks Adam.
my friends told me that the old 11.5R motor is lack of torque and topspeed. I'll test my comp3.0 this weekend, hopefully it performs better. |
Guys,
I have 2 brand new GT2 escs. They both run great, but in the couple of seconds that the spektrum is binding each time I turn the car on, the motor spins slowly. Is this normal? Once the receiver is bound up everything is completely normal and the car runs great. Michael Jones |
Spektrum receivers have a failsafe function that defaults to whatever value the throttle is in when you bind the receiver. Recalibrate your esc, then rebind your Spektrum and hold full reverse when you rebind it. Or just leave it alone. It won't hurt anything.
|
Originally Posted by ixlr8nz
(Post 6470146)
Guys,
I have 2 brand new GT2 escs. They both run great, but in the couple of seconds that the spektrum is binding each time I turn the car on, the motor spins slowly. Is this normal? Once the receiver is bound up everything is completely normal and the car runs great. Michael Jones Tony Doherty |
Originally Posted by ark
(Post 6469705)
I have a question tho, the gt2.0 comes with max timing advance as standard setting, Im running mod 4.5 so I turned timing off. Did I do the right thing? cheers |
Originally Posted by andrewdoherty
(Post 6470250)
Spektrum receivers have a failsafe function that defaults to whatever value the throttle is in when you bind the receiver. Recalibrate your esc, then rebind your Spektrum and hold full reverse when you rebind it. Or just leave it alone. It won't hurt anything.
Mike |
Originally Posted by abailey21
(Post 6466984)
Highly advised to NOT run both switches, it's a quick way to make your ESC go poof
|
hey mike how did you get on???my sp ver 3 motor is only 40degree celcius after a race my lrp x12was 100 is this normal ???does it mean i can gear more both are 4 turn motors
|
Originally Posted by ark
(Post 6469705)
kriiiss
Ive only just got mine and I run 40c 7.4 intellect and I set it at 3.0v per cell. I hope its right. I have a question tho, the gt2.0 comes with max timing advance as standard setting, Im running mod 4.5 so I turned timing off. Did I do the right thing? cheers Nar, put the timing back up to Max. I run all my Motors, 4.5, 4.0 on Max Timing, heaps faster this way :) Ryan. |
| All times are GMT -7. It is currently 03:42 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.