|
Setups
Originally Posted by Solara
(Post 9291692)
Who want to see Competition V3 4.0T with 323stock setup from the ETS round 5 A1 Marc Rheinard, Viktor Wilck, Yanni Prumper and Steen Graversen used? :sneaky:
Regards Gary |
setup
Originally Posted by Solara
(Post 9291692)
Who want to see Competition V3 4.0T with 323stock setup from the ETS round 5 A1 Marc Rheinard, Viktor Wilck, Yanni Prumper and Steen Graversen used? :sneaky:
|
Originally Posted by Solara
(Post 9291972)
Once I have that done, will post on SP website to download. I bet that will work on your hobbywing gears....
Too much..? Who will complain about FAST..? When you can hang with the 1/8th nitro ON ROAD car.....that is PRICELESS :sneaky: |
Software
Hey Guy's,
Just got myself a SpeedPassion GT2.1 Prostock, my question is which software do I download from the SP website? I will be running 21.5. Thanx in advance |
Originally Posted by Solara
(Post 9291972)
Who will complain about FAST..? When you can hang with the 1/8th nitro ON ROAD car.....that is PRICELESS :sneaky:
Yeah, but you know, after 5 minutes, a 1/8th comes in for refueling, and goes on again.... :D |
Originally Posted by sidecarphil1
(Post 9291883)
TQ was Jilles with the Vortex from Orion :rolleyes::rolleyes::rolleyes:
|
Originally Posted by Reidy
(Post 9294530)
Hey Guy's,
Just got myself a SpeedPassion GT2.1 Prostock, my question is which software do I download from the SP website? I will be running 21.5. Thanx in advance http://www.speedpassion.net/en/produ...ESC&t=download |
Originally Posted by M7H
(Post 9294626)
Phil, do you actually know with which manufacturer the new Orion ESC is developed?..... :D
|
Originally Posted by M7H
(Post 9294626)
Phil, do you actually know with which manufacturer the new Orion ESC is developed?..... :D
|
I have the Citrix 21.5 and ko propo UR-5 radio and have set up my esc a few times per instructions. My problem is I can't get the brakes to work. Can anyone assist on this situation?
|
Originally Posted by AsphaltAssasin
(Post 9303534)
I have the Citrix 21.5 and ko propo UR-5 radio and have set up my esc a few times per instructions. My problem is I can't get the brakes to work. Can anyone assist on this situation?
|
Hello, anyone using 2.1 EX with 1S?
First the custom cut off only goes from 3,5v up, i want to put it in 3,2 or else he cuts very early. No i'm running with no cut off with a 5200 lipo and when i reach half of the charge the car start to fail, i've read this ESC have a internal booster, anyone now the reason of the early fail? |
Originally Posted by arny
(Post 9312727)
Hello, anyone using 2.1 EX with 1S?
First the custom cut off only goes from 3,5v up, i want to put it in 3,2 or else he cuts very early. No i'm running with no cut off with a 5200 lipo and when i reach half of the charge the car start to fail, i've read this ESC have a internal booster, anyone now the reason of the early fail? |
Yes, now i'm running off, but the car starts to fail with half the battery.
SP2.1EX with 7,5T v3 on 1/12th car Do you think the fail came from low voltage on the receiver? i've switched from LPF to this one because the internal booster. |
What program now is used by top drivers in Modified? I hear that 323 Stock is in testing in Modi class.
But what settings, different gearing? |
| All times are GMT -7. It is currently 06:32 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.