R/C Tech Forums - The Speed Passion Thread

Hi guys
Just wondering, Is the SP GT2.1 Prostock ESc capable of running Mod motors?
What is the limit? And need to change software/firmware? Thinking of purchasing one. Already have the GT2.1 Pro, Making that as spare.

Thnks

20 SMOKE

05-13-2010 06:28 PM

Quote:

Originally Posted by Marcos.J (Post 7402613)

could be i never measured it, racing , I was I cant now have to work:mad:

dam drunks

Marcos.J

05-13-2010 06:36 PM

Quote:

Originally Posted by Humyu (Post 7402666)

I dont have one yet but If i recall its a 9.5 motor limit

mr crum

05-13-2010 06:54 PM

Quote:

Originally Posted by 20 SMOKE (Post 7402598)

you running this weekend,i thought ceaser said it was around 160ft

120x60

20 SMOKE

05-13-2010 07:20 PM

Quote:

Originally Posted by mr crum (Post 7402799)

120x60

thank you mr crum,are going to have any thing for me this weekend:D

AGNO	05-14-2010 01:19 AM

Unfortunately, there is a Bug in FW 100422 DDRS, (not present in 100324) can be solved?

mr crum

05-14-2010 03:41 AM

Quote:

Originally Posted by 20 SMOKE (Post 7402913)

thank you mr crum,are going to have any thing for me this weekend:D

doubt it since we dont run the same class

defcone

05-14-2010 03:50 AM

Quote:

Originally Posted by AGNO (Post 7403924)

Unfortunately, there is a Bug in FW 100422 DDRS, (not present in 100324) can be solved?

wat bug?

AGNO	05-14-2010 04:16 AM

Quote:

Originally Posted by defcone (Post 7404153)

wat bug?

Supercharger does not work if you set a value less than 7 in DDRS.

charlie_b

05-14-2010 05:47 AM

Quote:

Originally Posted by AGNO (Post 7404196)

Supercharger does not work if you set a value less than 7 in DDRS.

DDRS we leave it at 8 or 9. Reason being, with the Supercharger software, we now control punch with SC Punch #15. If you want more punch, lower your parameter on #15. All these settings relate to each other. If you turn down DDRS too low, SC Punch will not be activated.

Tha Skinny

05-14-2010 09:27 AM

Quote:

Originally Posted by Marcos.J (Post 7402651)

oh ok , then you should be fine:)

Marcos, what kinda of esc temps were you getting on that setup? I temped at 108. and 116 on the motor. I see the cutoff is 90deg?

Marcos.J

05-14-2010 11:31 AM

Quote:

Originally Posted by Tha Skinny (Post 7405200)

Marcos, what kinda of esc temps were you getting on that setup? I temped at 108. and 116 on the motor. I see the cutoff is 90deg?

My esc was 92 degrees and motor was 112 that was outdoors in florida