6LikesSchumacher Mi4
04-19-2010, 10:13 AM
#1801
Tech Master
iTrader: (14)
Guys im confused....
I'm trying to order a bearing set for my MI4 from AVID but when i look at the parts list for the bearings it shows some ceramic some not, and in the ceramic KIT it looks to be only half of the bearings needs?!? I need to order these today or tomorrow to make sure i have them for this weekend...these are what i have down as needed..please correct if im wrong!
2 - 4x8x3
2 - 5x9x3
2 - 5x10x4
8 - 10x5x4
2 - 5x9x3
2 - 10x15x4
2 - 5x8x2.5
please correct if im wrong!
I'm trying to order a bearing set for my MI4 from AVID but when i look at the parts list for the bearings it shows some ceramic some not, and in the ceramic KIT it looks to be only half of the bearings needs?!? I need to order these today or tomorrow to make sure i have them for this weekend...these are what i have down as needed..please correct if im wrong!
2 - 4x8x3
2 - 5x9x3
2 - 5x10x4
8 - 10x5x4
2 - 5x9x3
2 - 10x15x4
2 - 5x8x2.5
please correct if im wrong!
04-19-2010, 11:29 AM
#1802
Originally Posted by geubes
Is anyone running Sweep on the front of the car? if so how much and why did you put this sweep on?
main reason i ask, is I am struggling with getting the car to enter the corner quicker - its like trying to turn a bus. Corner exit is lovely, but entry is just very slow.
Will some sweep help get a bit more entry?
main reason i ask, is I am struggling with getting the car to enter the corner quicker - its like trying to turn a bus. Corner exit is lovely, but entry is just very slow.
Will some sweep help get a bit more entry?
Also here is video of car running the main yesterday
http://www.youtube.com/watch?v=ZWD3PFdWi-s
04-19-2010, 12:15 PM
#1803
Tech Adept
Hello, thanks Kenny for share your sheets, are very appreciated.
This are the setup we used last month for win 1rd Nationals, and 3 cars in final A, this is the base setup.
Here we used Antidive, for good reaction in front, and good steering, rear sometimes we use Hpi Blue springs, if the grip is low (some drivers use Schumacher springs, with the same results).
Now i work in other setup, with diferent weight balance, more easy to drive, and very fast, i tested this weekend in carpet, with TQ and track record, but with very bad luck in finals, i only finish 5th, but the car are dialed.
This weekend go to test in tarmac, and the next weekend travel to race 2rd National, im very confident with the car now.
Setup Base:http://www.mediafire.com/?uuymzimmrmo
Greetings, Luis C.
This are the setup we used last month for win 1rd Nationals, and 3 cars in final A, this is the base setup.
Here we used Antidive, for good reaction in front, and good steering, rear sometimes we use Hpi Blue springs, if the grip is low (some drivers use Schumacher springs, with the same results).
Now i work in other setup, with diferent weight balance, more easy to drive, and very fast, i tested this weekend in carpet, with TQ and track record, but with very bad luck in finals, i only finish 5th, but the car are dialed.
This weekend go to test in tarmac, and the next weekend travel to race 2rd National, im very confident with the car now.
Setup Base:http://www.mediafire.com/?uuymzimmrmo
Greetings, Luis C.
04-19-2010, 12:19 PM
#1804
Originally Posted by luic
Hello, thanks Kenny for share your sheets, are very appreciated.
This are the setup we used last month for win 1rd Nationals, and 3 cars in final A, this is the base setup.
Here we used Antidive, for good reaction in front, and good steering, rear sometimes we use Hpi Blue springs, if the grip is low (some drivers use Schumacher springs, with the same results).
Now i work in other setup, with diferent weight balance, more easy to drive, and very fast, i tested this weekend in carpet, with TQ and track record, but with very bad luck in finals, i only finish 5th, but the car are dialed.
This weekend go to test in tarmac, and the next weekend travel to race 2rd National, im very confident with the car now.
Setup Base:http://www.mediafire.com/?uuymzimmrmo
Greetings, Luis C.
This are the setup we used last month for win 1rd Nationals, and 3 cars in final A, this is the base setup.
Here we used Antidive, for good reaction in front, and good steering, rear sometimes we use Hpi Blue springs, if the grip is low (some drivers use Schumacher springs, with the same results).
Now i work in other setup, with diferent weight balance, more easy to drive, and very fast, i tested this weekend in carpet, with TQ and track record, but with very bad luck in finals, i only finish 5th, but the car are dialed.
This weekend go to test in tarmac, and the next weekend travel to race 2rd National, im very confident with the car now.
Setup Base:http://www.mediafire.com/?uuymzimmrmo
Greetings, Luis C.
04-19-2010, 01:27 PM
#1805
Tech Adept
Originally Posted by Kenny L
having issue with opening pdf
Greetings, Luis C.
04-19-2010, 01:40 PM
#1806
Originally Posted by luic
I use Adobe Reader 9, without problems.
Greetings, Luis C.
Greetings, Luis C.
04-19-2010, 02:18 PM
#1807
Tech Adept
Is strange, i download well and open. Upload it to other server.
http://d01.megashares.com/dl/ukIGuh1/Base%20Team.pdf
Greetings, Luis C.
http://d01.megashares.com/dl/ukIGuh1/Base%20Team.pdf
Greetings, Luis C.
04-19-2010, 03:07 PM
#1808
Originally Posted by luic
Is strange, i download well and open. Upload it to other server.
http://d01.megashares.com/dl/ukIGuh1/Base%20Team.pdf
Greetings, Luis C.
http://d01.megashares.com/dl/ukIGuh1/Base%20Team.pdf
Greetings, Luis C.
04-19-2010, 04:10 PM
#1810
now its working
04-20-2010, 10:58 AM
#1811
Tech Adept
Sorry for inconveniences, i send a copy to petitrc website (Arn0), for it the problems continue with downloads, i have reviewed and completed some more things, for this more complete.
http://www.petitrc.com/reglages/schu...umacherMi4.htm
is great site, with a lot of setups.
You need wait, for it appear, i send today to they.
Greetings, Luis C.
http://www.petitrc.com/reglages/schu...umacherMi4.htm
is great site, with a lot of setups.
You need wait, for it appear, i send today to they.
Greetings, Luis C.
04-20-2010, 12:45 PM
#1813
Originally Posted by MikeXray
Anyone know how many MM difference there is between the 1/2/3 groove link mounts?
04-25-2010, 11:36 AM
#1814
Tech Initiate
04-25-2010, 02:16 PM
#1815
Here is setup I ran yesterday at Jackson NJ car was real good
