T.O.P. Racing "Photon" 1/10 EP Touring Car
#8356
Tech Adept
Thanks
#8359
Tech Elite
iTrader: (24)
The setup I ran is the same as the normal setup I run except I had 60 fr 50 rear losi shock oil.
Full long camber links all the way around. Stock camber plates.
2mm shim under the front inner camber link.
no anti squat in the rear. Medium Low roll center blocks all the way around.
Everything else is the same
Full long camber links all the way around. Stock camber plates.
2mm shim under the front inner camber link.
no anti squat in the rear. Medium Low roll center blocks all the way around.
Everything else is the same
#8360
Tech Adept
#8361
New guy needs some help
I just purchased my first Photon car. I need some assistance with a setup for this car for carpet and asphalt. Also looking for a gear setup for a Tekin 17.5 motor in blinky mode. What body works best? Do I need to upgrade anything on this car?
Thanks
Mike
Thanks
Mike
#8362
Tech Champion
iTrader: (103)
Congrats on the car Mike. Hanulec has done a great job keeping track of all the info required for this car. Take a look here and you should answer alot of your questions. Depending on track size, you should start around 4.0 fdr for blinky. The Photon internal ratio is 2.0 so your math skills won't get tested too much. I like the P-37 body or the LTC-R. Good luck. If you need any help, this is the place to go.
#8363
thanks
http://racerlog.com/wiki/T.O.P._Photon
Congrats on the car Mike. Hanulec has done a great job keeping track of all the info required for this car. Take a look here and you should answer alot of your questions. Depending on track size, you should start around 4.0 fdr for blinky. The Photon internal ratio is 2.0 so your math skills won't get tested too much. I like the P-37 body or the LTC-R. Good luck. If you need any help, this is the place to go.
Congrats on the car Mike. Hanulec has done a great job keeping track of all the info required for this car. Take a look here and you should answer alot of your questions. Depending on track size, you should start around 4.0 fdr for blinky. The Photon internal ratio is 2.0 so your math skills won't get tested too much. I like the P-37 body or the LTC-R. Good luck. If you need any help, this is the place to go.
I will take a look at that website.
#8364
Website
Ok I read this webpage and of course I dont really understand half of the info. The car i bought came with nimh chassis and a brand new lipo chassis. Also came with a spec-r gear diff and a stock gear diff and low friction belts. The person I bought it from said it has Jesse Starks mod setup from the Reedy race. I can't seem to find that setup.
#8365
Give it a run with the setup that it has on it and see what it needs and go from there.
I find the pro setups dont always work for everyone. well not for me
I find the pro setups dont always work for everyone. well not for me
#8366
MDhyams: If you are looking for this set up, here you go. Welcome to the Photon family. Let us know how things go
#8367
whats the flex like on the new Photon EX Vs the Photon chassis's
#8369
The Photon is as durable as any of the other cars available, each one has it's weak and strong points