T.O.P. Racing "Photon" 1/10 EP Touring Car
#7292
Yes, I believe it is still a prototype. The battery is held down with tape. Looks like the X-ray set up.
#7293
There's a better view of how the battery is secured.
I've been running this chassis for 2 mos or so. It is simply amazing!
#7294
I want this Chassis!
#7296
#7297
isn't TOP product !
#7298
Tech Champion
I'm finding I don't like the way the pivot balls are done on top of the front suspension hubs. I've had the set screw come loose from the ball a few times now. I would prefer to replace that with a normal ball stud. Does anyone know which ball stud best matches the stock setup?
#7299
#7301
It is not a Top product.
#7302
Tech Master
iTrader: (1)
Whomever it was should sell those narrow chassis. Would probably sell quite a few. Maybe sell a motor mount that puts the motor slightly closer to center too while they're at it.
I'd also love it if anyone would make the end piece of the bellcrank that holds the radial Ackerman insert, out of something other than plastic. There are upgrades for every other part of the bell crank, but that one piece that isn't sold separately from a bunch of other plastic stuff that you don't need.
I'd also love it if anyone would make the end piece of the bellcrank that holds the radial Ackerman insert, out of something other than plastic. There are upgrades for every other part of the bell crank, but that one piece that isn't sold separately from a bunch of other plastic stuff that you don't need.
#7303
Tech Apprentice
iTrader: (12)
I'm finding I don't like the way the pivot balls are done on top of the front suspension hubs. I've had the set screw come loose from the ball a few times now. I would prefer to replace that with a normal ball stud. Does anyone know which ball stud best matches the stock setup?
#7304
Tech Elite
iTrader: (24)
I'm finding I don't like the way the pivot balls are done on top of the front suspension hubs. I've had the set screw come loose from the ball a few times now. I would prefer to replace that with a normal ball stud. Does anyone know which ball stud best matches the stock setup?
I'm not sure what I'm doing differently than other people.
#7305
Tech Champion
iTrader: (9)
Given their history, i cant see Josh selling them direct, or TOP copying the design and manufacturing them directly.
I have hit up Smokem a number of times, but he is hesitant given the age of the car, expecting a new design to come. But without Josh, what are the chances of an improved design coming in the short term?