smilekt

iTrader: (13)

any one using other version of rear lower arm ? like top arp version on photon ?

mikky32

I tried Xray front arms and they fit but they are a bit more to the back.
I didn't had down stops bud it worked quit good.
Without down stops the car is almost impossible to drive. Chicanes work great bud normal corners is a disaster.

sosidge

Why do you ask?

The old ARP/Scythe/HPI arms won't be a direct fit because the hinge pins are different, although you should be able fit the whole assembly onto the rear (arms, hubs, roll-bar links, maybe you would need to change the driveshafts too). The old parts have a slightly different geometry on the outer camber link and a different offset for the wheelbase which you should be able to take up with spacers.

You should also be able to swap the old parts onto the front in the same manner, the geometry is the same apart from the offset wheelbase.

But the Photon parts are very robust.

pmc

Hello

I have a friend who wants to give me a set of springs from the scythe.

Wish is the diference of the Top scythe springs to the Top Photon springs?

The springs of scythe fit in the photon shocks?

Thanks in advance
Best regards:
Pedro Silva

mikky32

I use now also the Scythe springs. They are a bit shorter but fit very good.

*SBH*

TQ and win at the 5th round of the Danish Championships yesterday.
The track was super cool with a nice flow, and the car was awesome

2 out of 2 possible after the change to T.O.P.

Soeren Boy Holst
Denmark

stiltskin

iTrader: (103)

Congratulations. Keep it going.

vr6cj

iTrader: (124)

With that set up there you posted...is it me or is the belt pretty tight with whats on the sheet there?

P2

iTrader: (15)

Belt tension depends on what condition your belts are in, some are looser than others. Even is the loosest setting, I find that the front white LF belt is still too tight. I have since switched to the stock belts since I can get them more "free".

vr6cj

iTrader: (124)

Ok, got it. My first Top car and photon so was just following the set up but mine are tight like rubber band with those settings he has. Will adjust according. thanks

macdude

iTrader: (6)

Just putting the car together. Does TOP make a spacer kit? I see on the TOP usa site that you buy different size spacers but there doesn't seem to be kit that has several (4-8) of each size.

LOW ET

iTrader: (109)

spacers for what?

smoke81

Spacers to adjust most of the stuff on the car. Camber link angle, wheel base, car width, etc etc.

I don't know off hand of any kit, but I would agree it would be a pretty cool idea.

mrrcguy

iTrader: (25)

Yes, get the "TC-PSUS01". Its in the back of the manual under "Suspension".

sosidge

That one is only for the toe-in, it has a selection of 0.4mm/0.8mm/1mm/2mm large diameter spacers.

If you want to do camber links, wheelbase etc. they only come in individual sets. I've been combining the 0.5, 1mm and 2mm sets and that has covered me for every adjustment I've needed.

Of course, if you are not fussy about colour, other brands do sets with multiple sizes!