T.O.P. Racing "Photon" 1/10 EP Touring Car
#1096
#1097
#1098
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
#1099
You really don't want to know...
I think Josh did a good job and I met Josh in seattle ( Raincity) and this guy is pretty sharp...I would replace knuckle with the Photon part ..imo
I'm sure Josh will come up with better and harder material for racer need..
I think Josh did a good job and I met Josh in seattle ( Raincity) and this guy is pretty sharp...I would replace knuckle with the Photon part ..imo
I'm sure Josh will come up with better and harder material for racer need..
#1100
Sorry for the confusion but to clarify ...
WTF? = I don't understand.
WTF? = I don't understand.
#1101
josh done very good work
#1102
#1103
#1104
Tech Lord
iTrader: (32)
I'll be at the track about 18 hours today and tomorrow. I'm here now, and just ran my first pack through the car with the kit setup. We've got VERY high grip carpet, and run Jaco Blues. I've got the car at 1425g to prepare for IIC.
Initial impressions are pretty good. It's got a lot less steering than my 416 did (almost using full D/R) but I think that's all setup. I did a few fast laps, and plenty of slow ones. There's definitely some setup work to be done now, but that's to be expected. The car felt extremely smooth. I'm gonna start throwing some setup stuff at it now and see what sticks.
I didn't hit anything, so I can't say much about durability yet. Nothing came loose, so that's a good start!
Anybody else doing carpet testing? I haven't seen a carpet setup passed around anywhere, so I'm kinda starting from scratch here.
Initial impressions are pretty good. It's got a lot less steering than my 416 did (almost using full D/R) but I think that's all setup. I did a few fast laps, and plenty of slow ones. There's definitely some setup work to be done now, but that's to be expected. The car felt extremely smooth. I'm gonna start throwing some setup stuff at it now and see what sticks.
I didn't hit anything, so I can't say much about durability yet. Nothing came loose, so that's a good start!
Anybody else doing carpet testing? I haven't seen a carpet setup passed around anywhere, so I'm kinda starting from scratch here.
#1105
#1107
I'll be at the track about 18 hours today and tomorrow. I'm here now, and just ran my first pack through the car with the kit setup. We've got VERY high grip carpet, and run Jaco Blues. I've got the car at 1425g to prepare for IIC.
Initial impressions are pretty good. It's got a lot less steering than my 416 did (almost using full D/R) but I think that's all setup. I did a few fast laps, and plenty of slow ones. There's definitely some setup work to be done now, but that's to be expected. The car felt extremely smooth. I'm gonna start throwing some setup stuff at it now and see what sticks.
I didn't hit anything, so I can't say much about durability yet. Nothing came loose, so that's a good start!
Anybody else doing carpet testing? I haven't seen a carpet setup passed around anywhere, so I'm kinda starting from scratch here.
Initial impressions are pretty good. It's got a lot less steering than my 416 did (almost using full D/R) but I think that's all setup. I did a few fast laps, and plenty of slow ones. There's definitely some setup work to be done now, but that's to be expected. The car felt extremely smooth. I'm gonna start throwing some setup stuff at it now and see what sticks.
I didn't hit anything, so I can't say much about durability yet. Nothing came loose, so that's a good start!
Anybody else doing carpet testing? I haven't seen a carpet setup passed around anywhere, so I'm kinda starting from scratch here.
Sound good keep coming....
#1109
i was lookin at the std setup an the one of ej .it says 5 or 5.5 droop rear
at wat part of the arm should i put my mesure blok .becaus of the new shaped wheel block
at wat part of the arm should i put my mesure blok .becaus of the new shaped wheel block